110S 7/8 — CUTTER,MILLING,INVOLUTE GEAR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

110S 7/8: CUTTER,MILLING,INVOLUTE GEAR.

The CUTTER,MILLING,INVOLUTE GEAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG, flute_length: 6.125 INCHES NOMINAL IN, overall_length: 10.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-227-5954, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

110S 7/8

NSN: 5133-00-227-5954
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 60NQ9 — GREENFIELD INDUSTRIES INC (USA)

SPECIFICATIONS

material	STEEL OVERALL
point_type	CONVENTIONAL
point_angle	118.0 DEGREES NOMINAL
shank_style	STANDARD TAPER W/TANG
flute_length	6.125 INCHES NOMINAL IN
flute_quantity	2
overall_length	10.000 INCHES NOMINAL IN
special_features	TAPER SHANK LG; SMALLER THAN REGULAR SHANK; FRACTIONAL SIZE 7/8
cutting_end_style	GENERAL PURPOSE
nominal_cutting_diameter	0.8750 INCHES IN
cutting_rotation_direction	RIGHT-HAND
specification/standard_data	05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN	5133-00-227-5954

COMPONENT DIAGRAM

KEY FEATURES

•

CUTTING END STYLE: GENERAL PURPOSE

•

TAPER SHANK SIZE DESIGNATOR: 2 MORSE

•

FLUTE LENGTH: 6.125 INCHES NOMINAL IN

•

NOMINAL CUTTING DIAMETER: 0.8750 INCHES IN

•

CUTTING ROTATION DIRECTION: RIGHT-HAND

•

SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

•

SHANK STYLE: STANDARD TAPER W/TANG

TECHNICAL CHARACTERISTICS

CUTTING END STYLE	GENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR	2 MORSE
FLUTE LENGTH	6.125 INCHES NOMINAL IN
OVERALL LENGTH	10.000 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER	0.8750 INCHES IN
CUTTING ROTATION DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLE	STANDARD TAPER W/TANG
FLUTE QUANTITY	2
SPECIAL FEATURES	TAPER SHANK LG; SMALLER THAN REGULAR SHANK; FRACTIONAL SIZE 7/8

SUBSTITUTES & CROSS-REFERENCES 9

53556Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

C12505Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

74000Reference document

Same NSN cross-reference

Reference document — Secondary reference

10229Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

309-RTReference document

Same NSN cross-reference

Reference document — Secondary reference

1302Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy 110S 7/8?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 110S 7/8?

110S 7/8 is a CUTTER,MILLING,INVOLUTE GEAR.

What parts can replace 110S 7/8?

There are 9 known substitutes for 110S 7/8: 53556, C12505, 74000 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 110S 7/8?

110S 7/8 is cataloged in the U.S. Government catalog under NSN 5133-00-227-5954. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

110S 7/8 — CUTTER,MILLING,INVOLUTE GEAR

Request a Quote — 110S 7/8