PartsTable
Technical Data Sheet
Download PDF

110922 — VALVE,LINEAR,DIRECTIONAL CONTROL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

110922: VALVE,LINEAR,DIRECTIONAL CONTROL.

VALVE,LINEAR,DIRECTIONAL CONTROL. Key specifications include material: STEEL, construction: ONE-PIECE, hole_diameter: 0.343 INCHES NOMINAL IN, overall_width: 5.000 INCHES NOMINAL IN, style_designator: NON-CIRCULAR W/APERTURE, aperture_diameter: 3.531 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-011-0922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
110922
NSN: 5310-00-011-0922
NIINs: 000110922, 000290487, 006785665
FSC: 5310 — Nuts and Washers
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL
constructionONE-PIECE
hole_diameter0.343 INCHES NOMINAL IN
overall_width5.000 INCHES NOMINAL IN
style_designatorNON-CIRCULAR W/APERTURE
aperture_diameter3.531 INCHES NOMINAL IN
bolt_hole_quantity4
bolt_circle_diameter4.250 INCHES NOMINAL IN
outside_corner_radius0.375 INCHES NOMINAL IN
outside_corner_inverted_radius0.375 INCHES NOMINAL IN
side_radius_from_gasket_center2.125 INCHES NOMINAL IN
NSN5310-00-011-0922
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 110922 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.3320 INCHES MINIMUM AND 0.3438 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 1 STYLE AND A GRADE AND C GROUP
•
NUT HEIGHT: 0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.3320 INCHES MINIMUM AND 0.3438 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 1 STYLE AND A GRADE AND C GROUP
NUT HEIGHT0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
SURFACE TREATMENTNICKEL OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH32
SUBSTITUTES & CROSS-REFERENCES 1
FFN836GPCTYPE2STYLE1GRADEAReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 110922?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110922?
110922 is a VALVE,LINEAR,DIRECTIONAL CONTROL.
What parts can replace 110922?
There is 1 known substitute for 110922: FFN836GPCTYPE2STYLE1GRADEA. Substitute compatibility should be verified for your specific system.
What is the NSN for 110922?
110922 is cataloged in the U.S. Government catalog under NSN 5310-00-011-0922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110922