PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 110850
110850 ✓ Verified by PartsTable
Peach · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Toner modules from Peach ensure superb printouts with quality that remains consistent over the long run. The units are remanufactured, in a process that includes 100% replacement of all components subject to wear. Quality you can feel! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-395-7481, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
110850
NSN: 5340-00-395-7481
FSC: 5340
CAGE: 83311 — UNISON INDUSTRIES, LLC DBA UNISON INDUSTRIES INC (USA)
SPECIFICATIONS
materialPLASTIC
design_typeFRICTION
overall_diameter5.120 INCHES NOMINAL IN
special_featuresTM 9-4520-271-24P FIGURE 30
inside_diameter_length0.562 INCHES NOMINAL IN
end_item_identification4520-01-477-0568 HEATER DUCT TYPE PORTABLE 120,000 BTU
round_cap_outside_surface_conditionSMOOTH
general_characteristics_item_description1.250 IN. O/A DIA; NEOPRENE O-RING 1.000 IN. ID,1.250 IN. OD IN
part_name_assigned_by_controlling_agencyTRANSFORMER ASSEMBLY POWER
tube_outside_diameter_for_which_designed4.125 INCHES NOMINAL IN
NSN5340-00-395-7481
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 110850 MFR: Peach ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 4.125 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 5.120 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
MATERIAL: PLASTIC
•
INSIDE DIAMETER LENGTH: 0.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED4.125 INCHES NOMINAL IN
DESIGN TYPEFRICTION
OVERALL DIAMETER5.120 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
MATERIALPLASTIC
INSIDE DIAMETER LENGTH0.562 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
110850Interchangeable
interchangeable cross-reference
interchangeable
605750Interchangeable
interchangeable cross-reference
interchangeable
50369-3Interchangeable
interchangeable cross-reference
interchangeable
48710Interchangeable
interchangeable cross-reference
interchangeable
60438-100Interchangeable
interchangeable cross-reference
interchangeable
4X742Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 110850?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110850?
110850 is a TRANSFORMER ASSEMBLY manufactured by Peach.
What parts can replace 110850?
There are 6 known substitutes for 110850: 110850, 605750, 50369-3 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 110850?
110850 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-395-7481. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110850

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026