PartsTable
Technical Data Sheet
Download PDF

11082LUPSTYLEH1-L5 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11082LUPSTYLEH1-L5: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include seal_width: 0.468 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, construction: SOLID, housing_bore_diameter: 9.050 INCHES MINIMUM AND 9.060 INCHES MAXIMUM IN, accommodated_shaft_diameter: 7.997 INCHES MINIMUM AND 8.003 INCHES MAXIMUM IN, cross-sectional_shape_style: SINGLE LIP, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-396-3045, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11082LUPSTYLEH1-L5
NSN: 5330-01-396-3045
NIINs: 013963045, 014182862
FSC: 5330 — Packing and Gasket Materials
CAGE: 75165 — JOHNS MANVILLE INTL (USA)
SPECIFICATIONS
seal_width0.468 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
constructionSOLID
housing_bore_diameter9.050 INCHES MINIMUM AND 9.060 INCHES MAXIMUM IN
accommodated_shaft_diameter7.997 INCHES MINIMUM AND 8.003 INCHES MAXIMUM IN
cross-sectional_shape_styleSINGLE LIP
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-396-3045
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11082LUPSTYLEH1-L5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 7.995 INCHES MINIMUM AND 8.005 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 7.057 INCHES MINIMUM AND 7.067 INCHES MAXIMUM IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
HOUSING BORE DIAMETER7.995 INCHES MINIMUM AND 8.005 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER7.057 INCHES MINIMUM AND 7.067 INCHES MAXIMUM IN
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 11082LUPSTYLEH1-L5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11082LUPSTYLEH1-L5?
11082LUPSTYLEH1-L5 is a SEAL,PLAIN.
What is the NSN for 11082LUPSTYLEH1-L5?
11082LUPSTYLEH1-L5 is cataloged in the U.S. Government catalog under NSN 5330-01-396-3045. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11082LUPSTYLEH1-L5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.