11070390-4: INSULATION SLEEVING,ELECTRICAL,S.
INSULATION SLEEVING,ELECTRICAL,S. Key specifications include height: 1.300 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN, material: RUBBER NEOPRENE LOCATION NOT OTHERWISE SPECIFIED, flexibility: FLEXIBLE, temp_rating: -55.0 CELSIUS DEGC, special_features: INCLUDES MOLDING PORTS, style_designator: BOOT-90 DEGREES. This part is cataloged in the U.S.
Government catalog under NSN 5970-00-512-0876, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| height | 1.300 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| material | RUBBER NEOPRENE LOCATION NOT OTHERWISE SPECIFIED |
| flexibility | FLEXIBLE |
| temp_rating | -55.0 CELSIUS DEGC |
| special_features | INCLUDES MOLDING PORTS |
| style_designator | BOOT-90 DEGREES |
| reliability_indicator | NOT ESTABLISHED |
| environmental_protection | FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| minimum_tensile_strength | 1500 POUNDS PER SQUARE INCH LBS |
| main_body_large_end_inside_diameter | 0.940 INCHES MINIMUM AS SUPPLIED IN |
| main_body_small_end_inside_diameter | 0.460 INCHES MINIMUM AS SUPPLIED IN |
| material_document_and_classification | RT-501 RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED |
| NSN | 5970-00-512-0876 |
| MAIN BODY SMALL END INSIDE DIAMETER | 0.220 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| MAIN BODY SMALL END INSIDE DIAMETER | 0.460 INCHES MINIMUM AS SUPPLIED IN |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 45.0 NOMINAL AS SUPPLIED |
| TEMP RATING | -55.0 CELSIUS DEGC |
| DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | 0.370 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| MAIN BODY LARGE END INSIDE DIAMETER | 0.700 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY IN |
| MAIN BODY LARGE END INSIDE DIAMETER | 0.940 INCHES MINIMUM AS SUPPLIED IN |
| LARGE END WALL THICKNESS OF MAIN BODY | 0.110 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN |
| LARGE END WALL THICKNESS OF MAIN BODY | 0.110 INCHES MAXIMUM AS SUPPLIED IN |