PartsTable
Technical Data Sheet
Download PDF

11070121 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

11070121: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1075 OR STEEL OVERALL, hole_diameter: 0.780 INCHES NOMINAL IN, overall_height: 0.071 INCHES NOMINAL IN, outside_diameter: 1.004 INCHES NOMINAL IN, material_thickness: 0.0105 INCHES NOMINAL IN, material_document_and_classification: 66 FED STD 1ST MATERIAL RESPONSE OR ASTM-A682 ASSN STD 2ND MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-904-4126, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11070121
NSN: 5310-00-904-4126
FSC: 5310 — Nuts and Washers
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 1075 OR STEEL OVERALL
hole_diameter0.780 INCHES NOMINAL IN
overall_height0.071 INCHES NOMINAL IN
outside_diameter1.004 INCHES NOMINAL IN
material_thickness0.0105 INCHES NOMINAL IN
material_document_and_classification66 FED STD 1ST MATERIAL RESPONSE OR ASTM-A682 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NSN5310-00-904-4126
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11070121 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD 1ST MATERIAL RESPONSE OR ASTM-A682 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.004 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0105 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1075 OR STEEL OVERALL
•
HOLE DIAMETER: 0.780 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.071 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD 1ST MATERIAL RESPONSE OR ASTM-A682 ASSN STD 2ND MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.004 INCHES NOMINAL IN
MATERIAL THICKNESS0.0105 INCHES NOMINAL IN
MATERIALSTEEL COMP 1075 OR STEEL OVERALL
HOLE DIAMETER0.780 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
26Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11070121?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11070121?
11070121 is a WASHER,SPRING TENSION.
What parts can replace 11070121?
There is 1 known substitute for 11070121: 26. Substitute compatibility should be verified for your specific system.
What is the NSN for 11070121?
11070121 is cataloged in the U.S. Government catalog under NSN 5310-00-904-4126. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11070121