PartsTable
Technical Data Sheet
Download PDF

110600-1 — LIGHT EMITTING DIODE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

110600-1: LIGHT EMITTING DIODE.

The LIGHT EMITTING DIODE is a the manufacturer industrial component. Key specifications include head_style: DOUBLE HEXAGON W/ HOLE, head_height: 0.218 INCHES NOMINAL IN, thread_class: 3A A, adjustability: NONADJUSTABLE, mounting_type: FLOOR AND WALL, overall_width: 488.0 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-170-1421, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
110600-1
NSN: 5305-00-170-1421
NIINs: 001701421, 015435398, 015447267
FSC: 5305 — Screws
CAGE: 66503 — WOODWARD, INC. DIV FUEL SYSTEMS AND CONTROLS (USA)
SPECIFICATIONS
head_styleDOUBLE HEXAGON W/ HOLE
head_height0.218 INCHES NOMINAL IN
thread_class3A A
adjustabilityNONADJUSTABLE
mounting_typeFLOOR AND WALL
overall_width488.0 MILLIMETERS NOMINAL MM
thread_length0.162 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
overall_length958.0 MILLIMETERS NOMINAL MM
screw_materialIRON ALLOY 660
fastener_length0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
hardness_rating24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
seating_capacity1
NSN5305-00-170-1421
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 110600-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTENDED WASHER THICKNESS: 0.030 INCHES MINIMUM IN
•
HEAD HEIGHT: 0.218 INCHES NOMINAL IN
•
BEARING SURFACE OF HEAD SURFACE FINISH: 32.0 MICROINCHES
•
FASTENER LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
EXTENDED WASHER DIAMETER: 0.270 INCHES NOMINAL IN
•
THREAD LENGTH: 0.162 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
•
HARDNESS RATING: 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
TECHNICAL CHARACTERISTICS
EXTENDED WASHER THICKNESS0.030 INCHES MINIMUM IN
HEAD HEIGHT0.218 INCHES NOMINAL IN
BEARING SURFACE OF HEAD SURFACE FINISH32.0 MICROINCHES
FASTENER LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
EXTENDED WASHER DIAMETER0.270 INCHES NOMINAL IN
THREAD LENGTH0.162 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
HARDNESS RATING24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEDOUBLE HEXAGON W/ HOLE
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 1
MS9554-02Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 110600-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110600-1?
110600-1 is a LIGHT EMITTING DIODE.
What parts can replace 110600-1?
There is 1 known substitute for 110600-1: MS9554-02. Substitute compatibility should be verified for your specific system.
What is the NSN for 110600-1?
110600-1 is cataloged in the U.S. Government catalog under NSN 5305-00-170-1421. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110600-1