PartsTable
Technical Data Sheet
Download PDF

1106-838 — GENERATOR,ENGINE ACCESSORY

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

1106-838: GENERATOR,ENGINE ACCESSORY.

The GENERATOR,ENGINE ACCESSORY is a the manufacturer industrial component. Key specifications include keyway_width: 0.156 INCHES NOMINAL IN, pilot_height: 1.000 INCHES NOMINAL IN, thread_class: 2A A, keyway_length: 0.750 INCHES NOMINAL IN, thread_length: 0.781 INCHES NOMINAL IN, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-128-2358, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1106-838
NSN: 5306-00-128-2358
NIINs: 001282358, 003128273
FSC: 5306 — Bolts
CAGE: 66503 — WOODWARD, INC. DIV FUEL SYSTEMS AND CONTROLS (USA)
SPECIFICATIONS
keyway_width0.156 INCHES NOMINAL IN
pilot_height1.000 INCHES NOMINAL IN
thread_class2A A
keyway_length0.750 INCHES NOMINAL IN
thread_length0.781 INCHES NOMINAL IN
thread_seriesUNF
mounting_styleFLANGE MTD W/THREE MTG HOLES
pilot_diameter3.248 INCHES NOMINAL IN
submersibilityNONSUBMERSIBLE
thread_diameter0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
voltage_in_volts12.0
NSN5306-00-128-2358
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1106-838 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD
•
EXTENDED WASHER THICKNESS: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.348 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.375 INCHES NOMINAL IN
•
EXTENDED WASHER DIAMETER: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.875 INCHES MAXIMUM IN
•
HOLE CONFIGURATION STYLE: HEXAGON FLATS
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
EXTENDED WASHER THICKNESS0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
HEAD HEIGHT0.348 INCHES NOMINAL IN
FASTENER LENGTH1.375 INCHES NOMINAL IN
EXTENDED WASHER DIAMETER0.500 INCHES NOMINAL IN
THREAD LENGTH0.875 INCHES MAXIMUM IN
HOLE CONFIGURATION STYLEHEXAGON FLATS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1106-838?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1106-838?
1106-838 is a GENERATOR,ENGINE ACCESSORY.
What is the NSN for 1106-838?
1106-838 is cataloged in the U.S. Government catalog under NSN 5306-00-128-2358. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1106-838

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.