110558 — PLATE,RETAINING,CAB

✓ Government record, cited

Hama · ORING SEAL

PRODUCT OVERVIEW

110558: PLATE,RETAINING,CAB.

- New, very compact design - Standard candle-shaped bulbs can therefore be replaced without any problems - 7 W is equivalent to the brightness of a standard 30 W incandescent lamp - Pleasant light colour (2700K), is similar to incandescent lamps - Mini globe shape - Excellent colour rendering (Ra 85) - Suitable for interior and exterior use - Not suitable for dimmers, electric switches, photocells, timers and dusk-to-dawn sensors - 1 piece packed in blister - Amalgam Technologie: Yes - Warm-up time up to 60% of the full light output - Premature failure rate after 200h - Angle of Emission: 360 º - Structural Shape: Mini-Globe - Rated Life Time: 11000 h - Rated Wattage: 6,9 W - Rated Luminous Flux: 330 Im - Supply Voltage: 230 V - Burning Position: 360 º - Can be dimmed: No - Diameter: 46 mm - Lamp Power Factor >=: 0,5 % - Energy Efficiency Class: A (Scale from A to G, Optimum Value A) - Colour temperat This part is cataloged in the U.S. Government catalog under NSN 5340-00-594-9608, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS

110558

NSN: 5340-00-594-9608
NIINs: 005949608, 006944867
FSC: 5340 — Hardware, Commercial
CAGE: 44940 — CUMMINS POWER GENERATION INC. (USA)

SPECIFICATIONS

material	STEEL COMP 1212
design_type	SOLID
end_diameter	0.6600 INCHES MINIMUM AND 0.6650 INCHES MAXIMUM IN
bore_diameter	0.4600 INCHES MINIMUM AND 0.4640 INCHES MAXIMUM IN
overall_height	0.3750 INCHES NOMINAL IN
bore_taper_in_deg	7.1
first_step_length	0.0940 INCHES NOMINAL IN
first_step_diameter	0.9380 INCHES NOMINAL IN
second_end_diameter	0.6880 INCHES NOMINAL IN
chamfer_angle_in_deg	45.000
fsc_application_data	ENGINE BLOCK ASSEMBLY,ENGINE GASOLINE,NONAIRCRAFT,NONGUIDED MISSILE PRIME MOVING
distance_from_end_to_first_step	0.1880 INCHES NOMINAL IN
NSN	5340-00-594-9608

COMPONENT DIAGRAM

KEY FEATURES

•

FSC APPLICATION DATA: ENGINE BLOCK ASSEMBLY,ENGINE GASOLINE,NONAIRCRAFT,NONGUIDED MISSILE PRIME MOVING

•

FIRST STEP DIAMETER: 0.9380 INCHES NOMINAL IN

•

END DIAMETER: 0.6600 INCHES MINIMUM AND 0.6650 INCHES MAXIMUM IN

•

SECOND END DIAMETER: 0.6880 INCHES NOMINAL IN

•

DISTANCE FROM END TO FIRST STEP: 0.1880 INCHES NOMINAL IN

•

DESIGN TYPE: SOLID

•

MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,AISI B1112,1212/SAE 1112 FED STD SINGLE MATERIAL RESPONSE

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.3750 INCHES NOMINAL IN
FSC APPLICATION DATA	ENGINE BLOCK ASSEMBLY,ENGINE GASOLINE,NONAIRCRAFT,NONGUIDED MISSILE PRIME MOVING
FIRST STEP DIAMETER	0.9380 INCHES NOMINAL IN
END DIAMETER	0.6600 INCHES MINIMUM AND 0.6650 INCHES MAXIMUM IN
SECOND END DIAMETER	0.6880 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST STEP	0.1880 INCHES NOMINAL IN
DESIGN TYPE	SOLID
MATERIAL DOCUMENT AND CLASSIFICATION	FED STD 66,AISI B1112,1212/SAE 1112 FED STD SINGLE MATERIAL RESPONSE
BORE TAPER IN DEG	7.1
FIRST STEP LENGTH	0.0940 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 1

110A558Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 110558?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 110558?

110558 is a PLATE,RETAINING,CAB manufactured by Hama.

What parts can replace 110558?

There is 1 known substitute for 110558: 110A558. Substitute compatibility should be verified for your specific system.

What is the NSN for 110558?

110558 is cataloged in the U.S. Government catalog under NSN 5340-00-594-9608. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

110558 — PLATE,RETAINING,CAB

Request a Quote — 110558