1105010SPR69 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

1105010SPR69: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, coil_quantity: 6 1/2, inside_diameter: 0.4235 INCHES MINIMUM AND 0.4315 INCHES MAXIMUM IN, style_designator: TAPERED, spring_free_length: 1.310 INCHES MINIMUM AND 1.325 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-015-3222, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1105010SPR69

NSN: 5360-00-015-3222
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 79227 — WATTS REGULATOR COMPANY (USA)

SPECIFICATIONS

material	STEEL COMP 302 OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity	6 1/2
inside_diameter	0.4235 INCHES MINIMUM AND 0.4315 INCHES MAXIMUM IN
style_designator	TAPERED
spring_free_length	1.310 INCHES MINIMUM AND 1.325 INCHES MAXIMUM IN
spring_solid_length	0.676 INCHES NOMINAL IN
coil_helix_direction	LEFT-HAND
spring_free_outside_diameter	0.725 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN
material_document_and_classification	SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN	5360-00-015-3222

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.725 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

SPRING SOLID LENGTH: 0.676 INCHES NOMINAL IN

•

STYLE DESIGNATOR: TAPERED

•

MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

SPRING FREE LENGTH: 1.310 INCHES MINIMUM AND 1.325 INCHES MAXIMUM IN

•

INSIDE DIAMETER: 0.4235 INCHES MINIMUM AND 0.4315 INCHES MAXIMUM IN

•

COIL QUANTITY: 6 1/2

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.725 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
SPRING SOLID LENGTH	0.676 INCHES NOMINAL IN
STYLE DESIGNATOR	TAPERED
MATERIAL DOCUMENT AND CLASSIFICATION	SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH	1.310 INCHES MINIMUM AND 1.325 INCHES MAXIMUM IN
INSIDE DIAMETER	0.4235 INCHES MINIMUM AND 0.4315 INCHES MAXIMUM IN
COIL QUANTITY	6 1/2
COIL HELIX DIRECTION	LEFT-HAND
MATERIAL	STEEL COMP 302 OVERALL

SUBSTITUTES & CROSS-REFERENCES 3

169Reference document

Same NSN cross-reference

Reference document — Secondary reference

69Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

1105010Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 1105010SPR69?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1105010SPR69?

1105010SPR69 is a SPRING,HELICAL,COMPRESSION.

What parts can replace 1105010SPR69?

There are 3 known substitutes for 1105010SPR69: 169, 69, 1105010. Substitute compatibility should be verified for your specific system.

What is the NSN for 1105010SPR69?

1105010SPR69 is cataloged in the U.S. Government catalog under NSN 5360-00-015-3222. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1105010SPR69 — SPRING,HELICAL,COMPRESSION

Request a Quote — 1105010SPR69