PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11039-8

11039-8 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL CASE, thickness: 1.160 INCHES MINIMUM MEMBER IN, design_type: DEAD BOLT, locking_mechanism_type: TURN KNOB. This part is cataloged in the Federal Logistics Information System under NSN 5340-00-025-2109, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11039-8
NSN: 5340-00-025-2109
FSC: 5340
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
materialSTEEL CASE
thickness1.160 INCHES MINIMUM MEMBER IN
design_typeDEAD BOLT
special_featuresBOLT TYPE:DOUBLE BEVEL;DEAD BOLT OPERATION METHOD:RING HANDLE ON OUTSIDE;KEY CHANGE QUANTITY:NONE;MASTER KEY PROVISION:NOT PROVIDED;
locking_mechanism_typeTURN KNOB
NSN5340-00-025-2109
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11039-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: DEAD BOLT
•
MATERIAL: STEEL CASE
•
THICKNESS: 1.160 INCHES MINIMUM MEMBER IN
•
LOCKING MECHANISM TYPE: TURN KNOB
TECHNICAL CHARACTERISTICS
DESIGN TYPEDEAD BOLT
MATERIALSTEEL CASE
SPECIAL FEATURESBOLT TYPE:DOUBLE BEVEL;DEAD BOLT OPERATION METHOD:RING HANDLE ON OUTSIDE;KEY CHANGE QUANTITY:NONE;MASTER KEY PROVISION:NOT PROVIDED;
THICKNESS1.160 INCHES MINIMUM MEMBER IN
LOCKING MECHANISM TYPETURN KNOB
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
GHN10250-1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
28065-DInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
6658323InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
4872InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
583073InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
51A456InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11039-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11039-8?
11039-8 is a GASKET.
What parts can replace 11039-8?
There are 18 known substitutes for 11039-8: GHN10250-1, 28065-D, 6658323 and 15 more. Substitute compatibility should be verified for your specific system.
Is 11039-8 still available?
11039-8 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11039-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026