PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11031123-1
11031123-1 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,RING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, shank_length: 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.750 INCHES MAXIMUM IN, overall_length: 1.660 INCHES MINIMUM AND 1.700 INCHES MAXIMUM IN, style_designator: ROUND, CLOSED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-056-0166, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11031123-1
NSN: 5306-00-056-0166
FSC: 5306
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
shank_length0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
thread_class3A A
thread_length0.750 INCHES MAXIMUM IN
overall_length1.660 INCHES MINIMUM AND 1.700 INCHES MAXIMUM IN
style_designatorROUND, CLOSED
thread_directionRIGHT-HAND
eye_outside_width0.750 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
eye_inside_diameter0.510 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
eye_stock_thickness0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
ring_stock_diameter0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
NSN5306-00-056-0166
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11031123-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
EYE OUTSIDE WIDTH: 0.750 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 12
•
THREAD LENGTH: 0.750 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ROUND, CLOSED
•
EYE INSIDE DIAMETER: 0.510 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
•
DISTANCE FROM CENTER OF EYE TO SHANK END: 3.760 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
EYE OUTSIDE WIDTH0.750 INCHES NOMINAL IN
THREAD QUANTITY PER INCH12
THREAD LENGTH0.750 INCHES MAXIMUM IN
STYLE DESIGNATORROUND, CLOSED
EYE INSIDE DIAMETER0.510 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
DISTANCE FROM CENTER OF EYE TO SHANK END3.760 INCHES NOMINAL IN
SHANK LENGTH0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
48B7796Upgraded Successor
successor cross-reference
successor
TW3010Interchangeable
interchangeable cross-reference
interchangeable
SP-2108Interchangeable
interchangeable cross-reference
interchangeable
322AS142-1Interchangeable
interchangeable cross-reference
interchangeable
5342PL0527106Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11031123-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11031123-1?
11031123-1 is a BOLT,RING.
What parts can replace 11031123-1?
There are 5 known substitutes for 11031123-1: 48B7796, TW3010, SP-2108 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11031123-1?
11031123-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-056-0166. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11031123-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026