PartsTable
Technical Data Sheet
Download PDF

11023751-1 — PULLEY,TIMING BELT

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

11023751-1: PULLEY,TIMING BELT.

The PULLEY,TIMING BELT is a the manufacturer industrial component. Key specifications include material: IRON CAST, bore_type: BUSHED, face_type: FLAT GROOVED WITH DOUBLE FLANGE, face_width: 2.750 INCHES NOMINAL IN, bore_diameter: 0.500 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN, overall_length: 2.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-322-0100, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11023751-1
NSN: 3020-01-322-0100
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 59678 — COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER DBA US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER (USA)
SPECIFICATIONS
materialIRON CAST
bore_typeBUSHED
face_typeFLAT GROOVED WITH DOUBLE FLANGE
face_width2.750 INCHES NOMINAL IN
bore_diameter0.500 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
overall_length2.750 INCHES NOMINAL IN
face_pitch_designation14MM MM
end_item_identification4940-01-209-8823
face_groove/tooth_quantity30
NSN3020-01-322-0100
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available PULLEY,TIMING BELT TITLE COMPONENT PN 11023751-1 MFR PULLEY,TIMING BELT
KEY FEATURES
•
FACE PITCH DESIGNATION: 14MM MM
•
FACE TYPE: FLAT GROOVED WITH DOUBLE FLANGE
•
BORE TYPE: BUSHED
•
FACE GROOVE/TOOTH QUANTITY: 30
•
BORE DIAMETER: 0.500 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
•
MATERIAL: IRON CAST
TECHNICAL CHARACTERISTICS
FACE PITCH DESIGNATION14MM MM
FACE TYPEFLAT GROOVED WITH DOUBLE FLANGE
OVERALL LENGTH2.750 INCHES NOMINAL IN
BORE TYPEBUSHED
FACE GROOVE/TOOTH QUANTITY30
END ITEM IDENTIFICATION4940-01-209-8823
BORE DIAMETER0.500 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
MATERIALIRON CAST
FACE WIDTH2.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
P30-14M-55 SKReference document
Same NSN cross-reference
Reference document — Secondary reference
11023751Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
P30-14M-55Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11023751-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11023751-1?
11023751-1 is a PULLEY,TIMING BELT.
What parts can replace 11023751-1?
There are 3 known substitutes for 11023751-1: P30-14M-55 SK, 11023751, P30-14M-55. Substitute compatibility should be verified for your specific system.
What is the NSN for 11023751-1?
11023751-1 is cataloged in the U.S. Government catalog under NSN 3020-01-322-0100. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11023751-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.