PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11021038-2
11021038-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 0.625 INCHES NOMINAL IN, style_designator: TWO PIECE, material_thickness: 0.312 INCHES NOMINAL IN, loop_inside_diameter: 1.750 INCHES NOMINAL IN, integral_nut_type_and_quantity: 2 PLAIN U BOLT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-083-8996, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11021038-2
NSN: 5340-01-083-8996
FSC: 5340
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
materialSTEEL BAND
overall_width0.625 INCHES NOMINAL IN
style_designatorTWO PIECE
material_thickness0.312 INCHES NOMINAL IN
loop_inside_diameter1.750 INCHES NOMINAL IN
integral_nut_type_and_quantity2 PLAIN U BOLT
NSN5340-01-083-8996
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11021038-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BAND
•
STYLE DESIGNATOR: TWO PIECE
•
MATERIAL THICKNESS: 0.312 INCHES NOMINAL IN
•
INTEGRAL NUT TYPE AND QUANTITY: 2 PLAIN U BOLT
•
LOOP INSIDE DIAMETER: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BAND
STYLE DESIGNATORTWO PIECE
MATERIAL THICKNESS0.312 INCHES NOMINAL IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
INTEGRAL NUT TYPE AND QUANTITY2 PLAIN U BOLT
LOOP INSIDE DIAMETER1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
3529Upgraded Successor
successor cross-reference
successor
90-4-27-35-LTUpgraded Successor
successor cross-reference
successor
F90D159Upgraded Successor
successor cross-reference
successor
WEB3529AInterchangeable
interchangeable cross-reference
interchangeable
1883611Interchangeable
interchangeable cross-reference
interchangeable
6014AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11021038-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11021038-2?
11021038-2 is a CLAMP,LOOP.
What parts can replace 11021038-2?
There are 17 known substitutes for 11021038-2: 3529, 90-4-27-35-LT, F90D159 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11021038-2?
11021038-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-083-8996. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11021038-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026