11020-7100-7 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

11020-7100-7: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.989 INCHES MINIMUM AND 1.019 INCHES MAXIMUM IN, center_hole_diameter: 0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-972-9254, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

11020-7100-7

NSN: 5331-00-972-9254
FSC: 5331 — O-ring
CAGE: 81168 — STROHMEYER, JULIE A. DBA JULIE A. STROHMEYER (USA)

SPECIFICATIONS

material	RUBBER SYNTHETIC
temp_rating	-40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.989 INCHES MINIMUM AND 1.019 INCHES MAXIMUM IN
center_hole_diameter	0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-972-9254

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.989 INCHES MINIMUM AND 1.019 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SYNTHETIC

TECHNICAL CHARACTERISTICS

TEMP RATING	-40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.989 INCHES MINIMUM AND 1.019 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
MATERIAL	RUBBER SYNTHETIC

SUBSTITUTES & CROSS-REFERENCES 4

J200AB20Reference document

Same NSN cross-reference

Reference document — Secondary reference

2-020P371-6Reference document

Same NSN cross-reference

Reference document — Secondary reference

2-020P761-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

2-020P642-70Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 11020-7100-7?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 11020-7100-7?

11020-7100-7 is a O-RING.

What parts can replace 11020-7100-7?

There are 4 known substitutes for 11020-7100-7: J200AB20, 2-020P371-6, 2-020P761-70 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 11020-7100-7?

11020-7100-7 is cataloged in the U.S. Government catalog under NSN 5331-00-972-9254. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

11020-7100-7 — O-RING

Request a Quote — 11020-7100-7