PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 110196
110196 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The TERMINAL,LUG is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CONDUCTOR ACCOMMODATION, thickness: 0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN, body_length: 1.680 INCHES NOMINAL IN, hole_diameter: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, largest_width: 0.156 INCHES SINGLE END IN, overall_width: 0.375 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-239-1962, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
110196
NSN: 5310-00-239-1962
FSC: 5310
CAGE: 10639 — AVIONICS SPECIALTIES, INC. (USA)
SPECIFICATIONS
materialCOPPER ALLOY CONDUCTOR ACCOMMODATION
thickness0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
body_length1.680 INCHES NOMINAL IN
hole_diameter0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
largest_width0.156 INCHES SINGLE END IN
overall_width0.375 INCHES IN
inclosure_typeOPEN
overall_length0.156 INCHES IN
overall_diameter0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
basic_shape_styleSOLDER
surface_treatmentTIN CONDUCTOR ACCOMMODATION SINGLE LAYER
material_thickness0.020 INCHES IN
NSN5310-00-239-1962
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 110196 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693 TYPE 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
THICKNESS: 0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-20693 TYPE 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.013 INCHES MINIMUM AND 0.017 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
110196Interchangeable
interchangeable cross-reference
interchangeable
7612738Interchangeable
interchangeable cross-reference
interchangeable
110-10Interchangeable
interchangeable cross-reference
interchangeable
12Interchangeable
interchangeable cross-reference
interchangeable
P12Interchangeable
interchangeable cross-reference
interchangeable
110B196Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 110196?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110196?
110196 is a TERMINAL,LUG.
What parts can replace 110196?
There are 6 known substitutes for 110196: 110196, 7612738, 110-10 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 110196?
110196 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-239-1962. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110196

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026