PartsTable
Technical Data Sheet
PartsTable / MRO / 110186
110186 ✓ Verified by PartsTable
Peach · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Stranded for flexible routing, solid for conduit THHN/THWN dual-rated — check both tables
Ampacity depends on installation method
PRODUCT OVERVIEW

Toner modules from Peach ensure superb printouts with quality that remains consistent over the long run. The units are remanufactured, in a process that includes 100% replacement of all components subject to wear. Quality you can feel! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-00-087-0675, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 110186
NSN: 6145-00-087-0675
FSC: 6145
CAGE: 88945 — PRESTOLITE WIRE LLC (USA)
SPECIFICATIONS
materialPLASTIC CASE
anode_typeSOLID
body_styleW/O MTG FACILITIES, RADIAL TERMINALS
body_length0.275 INCHES MAXIMUM IN
body_diameter0.600 INCHES MAXIMUM IN
terminal_length1.500 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
electrical_polarizationPOLARIZED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
tolerance_range_per_section-10.00 TO 10.00 PERCENT SINGLE SECTION
NSN6145-00-087-0675
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: 110186 · Peach ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B298 FED SPEC SINGLE MATERIAL RESPONSE CORE CONDUCTOR ALL CONDUCTORS
•
TEMP RATING: 150.0 CELSIUS DEGC
•
CONDUCTOR QUANTITY: 3
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B298 ASSN STD SINGLE TREATMENT RESPONSE CORE CONDUCTOR ALL CONDUCTORS
•
VOLTAGE RATING: 600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE ALL CONDUCTORS
•
PRECIOUS MATERIAL: SILVER
•
PRECIOUS MATERIAL AND LOCATION: SURFACE ALL CONDUCTORS SILVER AND SURFACE SHIELD,BRAID SILVER
•
TRACER COLOR: ORANGE FIRST TRACER THIRD CONDUCTOR
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B298 FED SPEC SINGLE MATERIAL RESPONSE CORE CONDUCTOR ALL CONDUCTORS
TEMP RATING150.0 CELSIUS DEGC
CONDUCTOR QUANTITY3
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B298 ASSN STD SINGLE TREATMENT RESPONSE CORE CONDUCTOR ALL CONDUCTORS
VOLTAGE RATING600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE ALL CONDUCTORS
PRECIOUS MATERIALSILVER
PRECIOUS MATERIAL AND LOCATIONSURFACE ALL CONDUCTORS SILVER AND SURFACE SHIELD,BRAID SILVER
TRACER COLORORANGE FIRST TRACER THIRD CONDUCTOR
TRACER COLORBLUE FIRST TRACER SECOND CONDUCTOR
CONDUCTOR FORMSTRANDED ALL CONDUCTORS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
6145PL0746019Upgraded Successor
successor cross-reference
successor
44A1131-20-9196193-9Upgraded Successor
successor cross-reference
successor
1896/6Upgraded Successor
successor cross-reference
successor
NEMA WC27500Upgraded Successor
successor cross-reference
successor
MIL-C-2750Upgraded Successor
successor cross-reference
successor
M27500-22MR6S12Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 110186?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110186?
110186 is a CAPACITOR,FIXED,ELECTROLYTIC manufactured by Peach. It is classified as a MRO (MRO_GENERAL).
What parts can replace 110186?
There are 18 known substitutes for 110186: 6145PL0746019, 44A1131-20-9196193-9, 1896/6 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 110186?
110186 is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-00-087-0675. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110186

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026