PartsTable
Technical Data Sheet
Download PDF

110179-4-8AS — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

110179-4-8AS: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, head_style: FLAT COUNTERSUNK UNDERCUT, grip_length: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, head_height: 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-283-7455, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
110179-4-8AS
NSN: 5305-00-283-7455
FSC: 5305 — Screws
CAGE: 80539 — SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA (USA)
SPECIFICATIONS
materialTITANIUM ALLOY OVERALL
head_styleFLAT COUNTERSUNK UNDERCUT
grip_length0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
head_height0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter0.502 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.442 INCHES MINIMUM AND 0.509 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES THREADS
fastener_length0.952 INCHES MINIMUM AND 0.999 INCHES MAXIMUM IN
special_featuresFURNISHED WITH ONE O-RING SEAL
thread_directionRIGHT-HAND
NSN5305-00-283-7455
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 110179-4-8AS · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
HEAD HEIGHT: 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.952 INCHES MINIMUM AND 0.999 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.442 INCHES MINIMUM AND 0.509 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: NAS621 COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OR AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL V
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH32.0 MICROINCHES GRIP
HEAD HEIGHT0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
FASTENER LENGTH0.952 INCHES MINIMUM AND 0.999 INCHES MAXIMUM IN
THREAD LENGTH0.442 INCHES MINIMUM AND 0.509 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONNAS621 COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OR AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL V
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 6
ST3M4Reference document
Same NSN cross-reference
Reference document — Secondary reference
BM33024V4-8UReference document
Same NSN cross-reference
Reference document — Secondary reference
ST3M430V4-8ASSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
WC8137-4-8ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10125107Reference document
Same NSN cross-reference
Reference document — Informative reference only
HT8137-4-8ASSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 110179-4-8AS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110179-4-8AS?
110179-4-8AS is a SCREW,CLOSE TOLERANCE.
What parts can replace 110179-4-8AS?
There are 6 known substitutes for 110179-4-8AS: ST3M4, BM33024V4-8U, ST3M430V4-8AS and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 110179-4-8AS?
110179-4-8AS is cataloged in the U.S. Government catalog under NSN 5305-00-283-7455. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110179-4-8AS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.