PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11014085X006
11014085X006 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 3.750 INCHES NOMINAL IN, aperture_diameter: 3.250 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-135-7227, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11014085X006
NSN: 5330-01-135-7227
FSC: 5330
CAGE: 45396 — GRUNDFOS CBS, INC DBA PACO PUMPS (USA)
SPECIFICATIONS
outside_diameter3.750 INCHES NOMINAL IN
aperture_diameter3.250 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
NSN5330-01-135-7227
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11014085X006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 3.750 INCHES NOMINAL IN
•
APERTURE DIAMETER: 3.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER3.750 INCHES NOMINAL IN
APERTURE DIAMETER3.250 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
GGG-K-00275Interchangeable
interchangeable cross-reference
interchangeable
138011-1Interchangeable
interchangeable cross-reference
interchangeable
14085Interchangeable
interchangeable cross-reference
interchangeable
N14085Interchangeable
interchangeable cross-reference
interchangeable
A14085Interchangeable
interchangeable cross-reference
interchangeable
6010498-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11014085X006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11014085X006?
11014085X006 is a GASKET.
What parts can replace 11014085X006?
There are 7 known substitutes for 11014085X006: GGG-K-00275, 138011-1, 14085 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11014085X006?
11014085X006 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-135-7227. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11014085X006

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026