PartsTable
Technical Data Sheet
PartsTable / MRO / 110116
110116 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The 110116 is a the manufacturer industrial component. Key specifications include unit_design: DESK TOP, overall_width: 1.71 INCHES NOMINAL IN, interface_type: RJ45, overall_height: 0.84 INCHES NOMINAL IN, frequency_in_hertz: 60.0, end_item_identification: AN/GRC-260. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-082-1621, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 110116
NSN: 5305-00-082-1621
FSC: 5305
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
unit_designDESK TOP
overall_width1.71 INCHES NOMINAL IN
interface_typeRJ45
overall_height0.84 INCHES NOMINAL IN
special_featuresDESCRIPTION: MICONVERTER 10/100; 10/100BT X RJ45 TO 100BF X ST/SM (1.3/30 KM), USB PWR ADAPTER; DEPTH: 4.10IN; US POWER SUPPLY 120V/60HZ; OPERATING TEMPERATURE: 0 TO +50DEG C V
frequency_in_hertz60.0
end_item_identificationAN/GRC-260
voltage_in_volts_and_current_type120.0 AC
part_name_assigned_by_controlling_agency(INAVY) CONVERTER, SM, USB
NSN5305-00-082-1621
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 110116 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 1.500 INCHES MAXIMUM IN
•
WIDTH BETWEEN FLATS: 0.606 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2A A
•
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH1.500 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS0.606 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.625 INCHES IN
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A A
FASTENER LENGTH1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
HEAD HEIGHT0.452 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH11
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
FF-S-210Interchangeable
interchangeable cross-reference
interchangeable
FF-S-103 TYPE 2 STYLE 5Interchangeable
interchangeable cross-reference
interchangeable
179120Interchangeable
interchangeable cross-reference
interchangeable
FF-S-210BInterchangeable
interchangeable cross-reference
interchangeable
MS51955-77Interchangeable
interchangeable cross-reference
interchangeable
MS51955-18Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 110116?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110116?
110116 is a 110116. It is classified as a MRO (MRO_GENERAL).
What parts can replace 110116?
There are 15 known substitutes for 110116: FF-S-210, FF-S-103 TYPE 2 STYLE 5, 179120 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 110116?
110116 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-082-1621. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110116

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026