The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE NITRILE, block_height: 0.565 INCHES NOMINAL0.565 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN, overall_height: 1.130 INCHES NOMINAL1.130 INCHES NOMINAL IN, overall_length: 2.880 INCHES NOMINAL2.880 INCHES NOMINAL IN, special_features: INCL 1 CHANNEL AND 2 SPACER SLEEVES. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-351-9233, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
11007-10G10
NSN:5340-01-351-9233 FSC:5340 — Hardware, Commercial CAGE:83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
material
RUBBER BUTADIENE NITRILE
block_height
0.565 INCHES NOMINAL0.565 INCHES NOMINAL IN
overall_width
0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN
overall_height
1.130 INCHES NOMINAL1.130 INCHES NOMINAL IN
overall_length
2.880 INCHES NOMINAL2.880 INCHES NOMINAL IN
special_features
INCL 1 CHANNEL AND 2 SPACER SLEEVES
style_designator
RECTANGULAR
mounting_facility
UNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter
0.625 INCHES NOMINAL ALL HOLES IN
clamping_hole_quantity
22
mounting_hole_diameter
0.260 INCHES MINIMUM AND 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM0.270 INCHES MAXIMUM IN
mounting_hole_quantity
22
NSN
5340-01-351-9233
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 22
•
CLAMPING HOLE QUANTITY: 22
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.872 INCHES NOMINAL IN
•
BLOCK HEIGHT: 0.565 INCHES NOMINAL0.565 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-C-85052 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-C-85449 MIL SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.260 INCHES MINIMUM AND 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM0.270 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY
22
OVERALL HEIGHT
1.130 INCHES NOMINAL1.130 INCHES NOMINAL IN
CLAMPING HOLE QUANTITY
22
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
0.872 INCHES NOMINAL IN
BLOCK HEIGHT
0.565 INCHES NOMINAL0.565 INCHES NOMINAL IN
STYLE DESIGNATOR
RECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-C-85052 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-C-85449 MIL SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER
0.260 INCHES MINIMUM AND 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM0.270 INCHES MAXIMUM IN
OVERALL LENGTH
2.880 INCHES NOMINAL2.880 INCHES NOMINAL IN
OVERALL WIDTH
0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11007-10G10?
11007-10G10 is a CLAMP,BLOCK.
What parts can replace 11007-10G10?
There are 2 known substitutes for 11007-10G10: 09A120-10G10N, TA30300267-13. Substitute compatibility should be verified for your specific system.
What is the NSN for 11007-10G10?
11007-10G10 is cataloged in the U.S. Government catalog under NSN 5340-01-351-9233. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.