PartsTable
Technical Data Sheet
Download PDF

11005-1 — CONNECTOR,RECEPTACLE,ELECTRICAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11005-1: CONNECTOR,RECEPTACLE,ELECTRICAL.

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, body_style: RIGHT ANGLE TYPE, thread_class: 2B AND 2A A, overall_width: 0.359 INCHES NOMINAL IN, terminal_type: PIN SINGLE MATING END SINGLE CONTACT GROUPING, overall_height: 0.550 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-346-2395, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11005-1
NSN: 5330-00-346-2395
NIINs: 003462395, 010663555
FSC: 5330 — Packing and Gasket Materials
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
body_styleRIGHT ANGLE TYPE
thread_class2B AND 2A A
overall_width0.359 INCHES NOMINAL IN
terminal_typePIN SINGLE MATING END SINGLE CONTACT GROUPING
overall_height0.550 INCHES NOMINAL IN
overall_length2.050 INCHES NOMINAL IN
insert_materialPLASTIC DIALLYL PHTHALATE SINGLE MATING END
special_featuresCONTACTS 2,4,6,8,10,AND 12 OMITTED; JACKSCREW TYPE-MALE AND LOCATION-RIGHT HAND TOPANDJACKSCREW TYPE-FEMALE AND LOCATION-LEFT HAND BOTTOM
thread_directionRIGHT-HAND
surface_treatmentANODIZE OVERALL
terminal_locationBACK SINGLE MATING END SINGLE CONTACT GROUPING
NSN5330-00-346-2395
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11005-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER GROOVE DEPTH: 0.211 INCHES NOMINAL IN
•
FSC APPLICATION DATA: AIR CONTITIONING SYSTEM
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.310 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
•
INNER GROOVE DEPTH: 0.081 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: H CHANNEL FLAT SIDES
•
PERIPHERAL DIAMETER: 1.112 INCHES MINIMUM AND 1.118 INCHES MAXIMUM IN
•
OUTER GROOVE WIDTH: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OUTER GROOVE DEPTH0.211 INCHES NOMINAL IN
FSC APPLICATION DATAAIR CONTITIONING SYSTEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CROSS-SECTIONAL HEIGHT0.310 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
INNER GROOVE DEPTH0.081 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEH CHANNEL FLAT SIDES
PERIPHERAL DIAMETER1.112 INCHES MINIMUM AND 1.118 INCHES MAXIMUM IN
OUTER GROOVE WIDTH0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
INNER GROOVE WIDTH0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11005-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11005-1?
11005-1 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What is the NSN for 11005-1?
11005-1 is cataloged in the U.S. Government catalog under NSN 5330-00-346-2395. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11005-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.