PartsTable
Technical Data Sheet
PartsTable / MRO / 11000PC7
11000PC7 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SWITCH,PRESSURE is a the manufacturer industrial component. Key specifications include head_style: KNURLED NO. 1, head_height: 0.438 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.750 INCHES NOMINAL IN, thread_length: 0.688 INCHES MINIMUM IN, screw_material: STEEL COMP 303.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-211-8139, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11000PC7
NSN: 5305-00-211-8139
FSC: 5305
CAGE: 94271 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
head_styleKNURLED NO. 1
head_height0.438 INCHES NOMINAL IN
thread_class2A A
head_diameter0.750 INCHES NOMINAL IN
thread_length0.688 INCHES MINIMUM IN
screw_materialSTEEL COMP 303
fastener_length1.812 INCHES NOMINAL IN
special_featuresSWITCH, LOW PRESSURE, SPW AND PW UNITS, 1PSI SET POINT
thread_directionRIGHT-HAND
internal_drive_styleSLOT
special_test_featuresSPECIAL QUALITY CONTROL TESTING
end_item_identificationDESALINTOR AVENGER CLASS MCM
NSN5305-00-211-8139
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11000PC7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.750 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
HEAD HEIGHT: 0.438 INCHES NOMINAL IN
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.750 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
TEST DATA DOCUMENT81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
HEAD HEIGHT0.438 INCHES NOMINAL IN
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD STYLEKNURLED NO. 1
SCREW MATERIALSTEEL COMP 303
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
310-180FInterchangeable
interchangeable cross-reference
interchangeable
110124Interchangeable
interchangeable cross-reference
interchangeable
2543289Interchangeable
interchangeable cross-reference
interchangeable
57665AXInterchangeable
interchangeable cross-reference
interchangeable
MS14315-9XInterchangeable
interchangeable cross-reference
interchangeable
J518Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11000PC7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11000PC7?
11000PC7 is a SWITCH,PRESSURE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11000PC7?
There are 12 known substitutes for 11000PC7: 310-180F, 110124, 2543289 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11000PC7?
11000PC7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-211-8139. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11000PC7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026