PartsTable
Technical Data Sheet
110-9-16 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- Universal nozzle to clean carpets and smooth floors<br>- Especially flat design, ideal under low sofas and cupboards<br>- Brush rail with additional rubber rail for good cleaning results on all smooth floors<br>- Very good cleaning over the whole nozzle width due to the newly designed air duct<br>- The double thread catcher effectively removes hairs and fabric fibres<br>- Comfortable switching over with the foot (carpet - smooth floor)<br>- Stainless steel base plate for long longevity<br>- Particularly good handling due to the combined rotating and tiltinig joint<br>- The rubberized rollers make it especially easy to use and floor-friendly<br>- Suitable for nearly all vacuum cleaners<br>- Tube connection: 35 mm (also suitable for 32 mm if the enclosed adapter is used)<br>- 1 piece packed in blister This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-8359, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
110-9-16
NSN: 5330-00-171-8359
FSC: 5330
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC PACKING
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
constructionONE-PIECE
flute_length4.875 INCHES NOMINAL IN
flute_quantity2
overall_length8.750 INCHES NOMINAL IN
outside_diameter0.965 INCHES MINIMUM AND 0.973 INCHES MAXIMUM IN
special_featuresTAPER SHANK LG; FRACTIONAL SIZE 9/16
cutting_end_styleGENERAL PURPOSE
surface_treatmentCADMIUM RETAINER
NSN5330-00-171-8359
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 110-9-16 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
OUTSIDE DIAMETER: 0.965 INCHES MINIMUM AND 0.973 INCHES MAXIMUM IN
CONSTRUCTION: ONE-PIECE
SURFACE TREATMENT: CADMIUM RETAINER
PACKING RING CROSS-SECTIONAL DIAMETER: 0.0305 INCHES NOMINAL IN
RETAINER THICKNESS: 0.748 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
MATERIAL: RUBBER SYNTHETIC PACKING
PACKING INSIDE DIAMETER: 0.602 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.965 INCHES MINIMUM AND 0.973 INCHES MAXIMUM IN
CONSTRUCTIONONE-PIECE
SURFACE TREATMENTCADMIUM RETAINER
PACKING RING CROSS-SECTIONAL DIAMETER0.0305 INCHES NOMINAL IN
RETAINER THICKNESS0.748 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC PACKING
MATERIALSTEEL RETAINER
PACKING INSIDE DIAMETER0.602 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
12194Interchangeable
interchangeable cross-reference
interchangeable
10036Interchangeable
interchangeable cross-reference
interchangeable
41136Interchangeable
interchangeable cross-reference
interchangeable
NAS577B6AInterchangeable
interchangeable cross-reference
interchangeable
10110225Interchangeable
interchangeable cross-reference
interchangeable
NAS577N6AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 110-9-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110-9-16?
110-9-16 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Hama.
What parts can replace 110-9-16?
There are 8 known substitutes for 110-9-16: 12194, 10036, 41136 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 110-9-16?
110-9-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-8359. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110-9-16