PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 110-7086
110-7086 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BALL,CHECK is a the manufacturer industrial component. Key specifications include end_item_identification: F-22 AIRCRAFT, part_name_assigned_by_controlling_agency: AUTO BALL VALVE 0.75 INCH IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-099-7877, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
110-7086
NSN: 5310-01-099-7877
FSC: 5310
CAGE: 36719 — WARTSILA CANADA INC (CAN)
SPECIFICATIONS
end_item_identificationF-22 AIRCRAFT
part_name_assigned_by_controlling_agencyAUTO BALL VALVE 0.75 INCH IN
NSN5310-01-099-7877
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 110-7086 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THICKNESS: 0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
SURFACE TREATMENT: ZINC OR CADMIUM OVERALL
•
OVERALL DIAMETER: 0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.214 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
CENTER HOLE SHAPE STYLEROUND
SURFACE TREATMENTZINC OR CADMIUM OVERALL
OVERALL DIAMETER0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.214 INCHES MINIMUM AND 0.227 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
10582Interchangeable
interchangeable cross-reference
interchangeable
120 1/2Interchangeable
interchangeable cross-reference
interchangeable
70400Interchangeable
interchangeable cross-reference
interchangeable
151C32Interchangeable
interchangeable cross-reference
interchangeable
151-32Interchangeable
interchangeable cross-reference
interchangeable
GC350AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 110-7086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110-7086?
110-7086 is a BALL,CHECK.
What parts can replace 110-7086?
There are 16 known substitutes for 110-7086: 10582, 120 1/2, 70400 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 110-7086?
110-7086 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-099-7877. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110-7086

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026