110-2659 — SHAFT ASSY

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

110-2659: SHAFT ASSY.

The SHAFT ASSY is a the manufacturer industrial component. This part is cataloged in the U.S. Government catalog under NSN 4210-00-395-7631, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

110-2659

NSN: 4210-00-395-7631
NIINs: 003957631, 011510041, 012353044, 012388276, 012428439
FSC: 4210 — Firefighting Equipment
CAGE: 03670 — TYCO FIRE PRODUCTS LP (USA)

SPECIFICATIONS

Part Number	110-2659
NSN	4210-00-395-7631

COMPONENT DIAGRAM

KEY FEATURES

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: BRASS,SAE 72,20.438 IN.O/A LG,1.121 IN.MIN,1.123 IN.MAX O/A DIA,CONSISTS OF SHAFT,SEALING PLUGS AND SHAFT PLATE,1ST END 0.933 IN.MIN 0.935 IN.MAX DEA,0.688 IN.LG,TWO OPPOSITE HOLES 0.161 IN.DIA LOCATED 0.250 IN.FROM C OF HOLES TO END,2ND END 1.500 IN.DIA,0.688 IN.LG,4 HOLES,0.204 IN.DIA DRILLED LONGITUDINAL,ONE HOLE 16.8125 IN.DEEP,2ND HOLE 17.5625 IN.DEEP,3RD HOLE 19.4062 IN.DEEP,4TH HOLE 18.1875 IN.DEEP,HOLES EQUALLY SPACED ON A 0.500 IN.BOLT CIRCLE;4 THD HOLES EQUALLY SPACED,0.344 IN.FROM C OF HOLE TO END OF 2ND END,1/8-27 NPT;BODY OF SHAFT 19.063 IN.LG,GROOVED STARTING AT 1ST END,END 1.121 IN.MIN 1.123 IN.MAX DIA 0.156 IN.FROM GROOVE TO END,0.863 IN.MIN,0.865 IN.MAX DIA OF GROOVES,0.149 IN.MIN 0.159 IN.MAX W OF 1ST 3RD 5TH,7TH AND 9TH GROOVE,0.219 IN.W OF 2ND,4TH,6TH AND 8TH GROOVE,0.438 IN.FROM 2ND GROOVE TO END 0.813 IN.FROM 3RD GROOVE TO END,1.073 IN.FROM 4TH GROOVE TO END,1.448 IN.FROM 5TH GROOVE TO END,1.688 IN.FROM 6TH GROOVE TO END,2.063 IN.FROM 7TH GROOVE TO END,2 IN

TECHNICAL CHARACTERISTICS

GENERAL CHARACTERISTICS ITEM DESCRIPTION

BRASS,SAE 72,20.438 IN.O/A LG,1.121 IN.MIN,1.123 IN.MAX O/A DIA,CONSISTS OF SHAFT,SEALING PLUGS AND SHAFT PLATE,1ST END 0.933 IN.MIN 0.935 IN.MAX DEA,0.688 IN.LG,TWO OPPOSITE HOLES 0.161 IN.DIA LOCATED 0.250 IN.FROM C OF HOLES TO END,2ND END 1.500 IN.DIA,0.688 IN.LG,4 HOLES,0.204 IN.DIA DRILLED LONGITUDINAL,ONE HOLE 16.8125 IN.DEEP,2ND HOLE 17.5625 IN.DEEP,3RD HOLE 19.4062 IN.DEEP,4TH HOLE 18.1875 IN.DEEP,HOLES EQUALLY SPACED ON A 0.500 IN.BOLT CIRCLE;4 THD HOLES EQUALLY SPACED,0.344 IN.FROM C OF HOLE TO END OF 2ND END,1/8-27 NPT;BODY OF SHAFT 19.063 IN.LG,GROOVED STARTING AT 1ST END,END 1.121 IN.MIN 1.123 IN.MAX DIA 0.156 IN.FROM GROOVE TO END,0.863 IN.MIN,0.865 IN.MAX DIA OF GROOVES,0.149 IN.MIN 0.159 IN.MAX W OF 1ST 3RD 5TH,7TH AND 9TH GROOVE,0.219 IN.W OF 2ND,4TH,6TH AND 8TH GROOVE,0.438 IN.FROM 2ND GROOVE TO END 0.813 IN.FROM 3RD GROOVE TO END,1.073 IN.FROM 4TH GROOVE TO END,1.448 IN.FROM 5TH GROOVE TO END,1.688 IN.FROM 6TH GROOVE TO END,2.063 IN.FROM 7TH GROOVE TO END,2 IN

SUBSTITUTES & CROSS-REFERENCES 2

SC2659Reference document

Same NSN cross-reference

Reference document — Secondary reference

801E1057Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy 110-2659?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 110-2659?

110-2659 is a SHAFT ASSY.

What parts can replace 110-2659?

There are 2 known substitutes for 110-2659: SC2659, 801E1057. Substitute compatibility should be verified for your specific system.

What is the NSN for 110-2659?

110-2659 is cataloged in the U.S. Government catalog under NSN 4210-00-395-7631. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

110-2659 — SHAFT ASSY

Request a Quote — 110-2659