PartsTable
Technical Data Sheet
Download PDF

110-112-12 — TEE,TUBE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

110-112-12: TEE,TUBE.

The TEE,TUBE is a the manufacturer industrial component. Key specifications include material: TITANIUM OVERALL, special_features: MATERIAL: 6AL-4V TITANIUM PER AMS 4965, FINISH: SOLID LUBE PER MIL-L-46010, TYPE 1, ON CONCAVE SEALING SURFACES ONLY V, surface_treatment: LUBRICANT OVERALL, operating_pressure: 5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, nominal_thread_size: 1.000 INCHES SECOND END IN, nominal_overall_length: 1.774 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-469-3560, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
110-112-12
NSN: 4730-01-469-3560
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 50599 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV STRATOFLEX PRODUCT DIVISION (USA)
SPECIFICATIONS
materialTITANIUM OVERALL
special_featuresMATERIAL: 6AL-4V TITANIUM PER AMS 4965, FINISH: SOLID LUBE PER MIL-L-46010, TYPE 1, ON CONCAVE SEALING SURFACES ONLY V
surface_treatmentLUBRICANT OVERALL
operating_pressure5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size1.000 INCHES SECOND END IN
nominal_overall_length1.774 INCHES IN
supplementary_featuresOPERATING PRESSURE: 5,000PSI,PROOF PRESSURE: 10,000PSI,BURST PRESSURE:20,000PSI
end_item_identificationV-22 OSPREY
thread_quantity_per_inch16 SECOND END
thread_series_designatorUNIFIED NATIONAL JOINT (UNJ) SECOND END
nominal_width_across_flats1.250 INCHES SECOND END IN
part_name_assigned_by_controlling_agencyFITTING, UNION, DYNAMIC BEAM SEAL, BULKHEAD, 5000 PSI
NSN4730-01-469-3560
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 110-112-12 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL WIDTH ACROSS FLATS: 1.250 INCHES SECOND END IN
•
SPECIAL TEST FEATURES: TUBE SIZE: 0.750", LENGTH: 1.774",LENGTH FROM 1ST END TO NUT: 0.990",LENGTH FROM 2ND END TO NUT: 0.412", WIDTH BETWEEN FLATS / HEX HEAD: 1.250",THREAD PER MIL-S-8879:1.0000-16 UNJ-3A, WEIGHT: .145LBS A
•
NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED: 0.750 INCHES FIRST END IN
•
SUPPLEMENTARY FEATURES: OPERATING PRESSURE: 5,000PSI,PROOF PRESSURE: 10,000PSI,BURST PRESSURE:20,000PSI
•
NOMINAL OVERALL LENGTH: 1.774 INCHES IN
•
OPERATING PRESSURE: 5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
NOMINAL THREAD SIZE: 1.000 INCHES SECOND END IN
TECHNICAL CHARACTERISTICS
NOMINAL WIDTH ACROSS FLATS1.250 INCHES SECOND END IN
SPECIAL TEST FEATURESTUBE SIZE: 0.750", LENGTH: 1.774",LENGTH FROM 1ST END TO NUT: 0.990",LENGTH FROM 2ND END TO NUT: 0.412", WIDTH BETWEEN FLATS / HEX HEAD: 1.250",THREAD PER MIL-S-8879:1.0000-16 UNJ-3A, WEIGHT: .145LBS A
NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED0.750 INCHES FIRST END IN
SUPPLEMENTARY FEATURESOPERATING PRESSURE: 5,000PSI,PROOF PRESSURE: 10,000PSI,BURST PRESSURE:20,000PSI
NOMINAL OVERALL LENGTH1.774 INCHES IN
OPERATING PRESSURE5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
NOMINAL THREAD SIZE1.000 INCHES SECOND END IN
SPECIAL FEATURESMATERIAL: 6AL-4V TITANIUM PER AMS 4965, FINISH: SOLID LUBE PER MIL-L-46010, TYPE 1, ON CONCAVE SEALING SURFACES ONLY V
SURFACE TREATMENTLUBRICANT OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYFITTING, UNION, DYNAMIC BEAM SEAL, BULKHEAD, 5000 PSI
OTHER ITEMS IN FSC 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
4730-00-000-1895 4730-00-000-4289 4730-00-000-4445 4730-00-000-8373 4730-00-000-8897 4730-00-001-0007 4730-00-001-0008
SUBSTITUTES & CROSS-REFERENCES 1
R45130T5/3-121208Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 110-112-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110-112-12?
110-112-12 is a TEE,TUBE.
What parts can replace 110-112-12?
There is 1 known substitute for 110-112-12: R45130T5/3-121208. Substitute compatibility should be verified for your specific system.
What is the NSN for 110-112-12?
110-112-12 is cataloged in the U.S. Government catalog under NSN 4730-01-469-3560. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110-112-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.