PartsTable
Technical Data Sheet
Download PDF

110-1038 — SEAT,HELICAL COMPRESSION SPRING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

110-1038: SEAT,HELICAL COMPRESSION SPRING.

SEAT,HELICAL COMPRESSION SPRING. Key specifications include material: STEEL, design_type: SOLID, end_diameter: 0.6250 INCHES NOMINAL IN, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_height: 0.3750 INCHES NOMINAL IN, style_designator: SEAT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-790-9297, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
110-1038
NSN: 5340-00-790-9297
FSC: 5340 — Hardware, Commercial
CAGE: 44940 — CUMMINS POWER GENERATION INC. (USA)
SPECIFICATIONS
materialSTEEL
design_typeSOLID
end_diameter0.6250 INCHES NOMINAL IN
bore_diameter0.5000 INCHES NOMINAL IN
overall_height0.3750 INCHES NOMINAL IN
style_designatorSEAT
bore_taper_in_deg7.0
first_step_length0.0781 INCHES NOMINAL IN
first_step_diameter1.0781 INCHES NOMINAL IN
chamfer_angle_in_deg22.0
second_step_diameter1.3750 INCHES NOMINAL IN
distance_from_end_to_first_step0.1875 INCHES NOMINAL IN
NSN5340-00-790-9297
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 110-1038 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST STEP DIAMETER: 1.0781 INCHES NOMINAL IN
•
END DIAMETER: 0.6250 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST STEP: 0.1875 INCHES NOMINAL IN
•
DESIGN TYPE: SOLID
•
STYLE DESIGNATOR: SEAT
•
SECOND STEP DIAMETER: 1.3750 INCHES NOMINAL IN
•
BORE TAPER IN DEG: 7.0
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.3750 INCHES NOMINAL IN
FIRST STEP DIAMETER1.0781 INCHES NOMINAL IN
END DIAMETER0.6250 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST STEP0.1875 INCHES NOMINAL IN
DESIGN TYPESOLID
STYLE DESIGNATORSEAT
SECOND STEP DIAMETER1.3750 INCHES NOMINAL IN
BORE TAPER IN DEG7.0
FIRST STEP LENGTH0.0781 INCHES NOMINAL IN
CHAMFER ANGLE IN DEG22.0
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
110A1038Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 110-1038?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110-1038?
110-1038 is a SEAT,HELICAL COMPRESSION SPRING.
What parts can replace 110-1038?
There is 1 known substitute for 110-1038: 110A1038. Substitute compatibility should be verified for your specific system.
What is the NSN for 110-1038?
110-1038 is cataloged in the U.S. Government catalog under NSN 5340-00-790-9297. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110-1038