110-103-3 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

110-103-3: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL COMP 1012 OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), body_length: 0.370 INCHES NOMINAL IN, grip_length: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, shank_style: PULL THROUGH HOLLOW SHANK, body_diameter: 0.030 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-714-7493, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 110-103-3

NSN: 5320-00-714-7493
NIINs: 007147493, 011249463, 015155795
FSC: 5320 — Rivets
CAGE: 97499 — BELL TEXTRON INC (USA)

SPECIFICATIONS

material	STEEL COMP 1012 OVERALL
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
body_length	0.370 INCHES NOMINAL IN
grip_length	0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
shank_style	PULL THROUGH HOLLOW SHANK
body_diameter	0.030 INCHES NOMINAL IN
terminal_type	WIRE LEAD
inclosure_type	ENCAPSULATED
shank_diameter	0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
fastener_length	0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
terminal_length	1.500 INCHES NOMINAL IN
expansion_device	KNOB STEM-TYPE K
NSN	5320-00-714-7493

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN

•

EXPANSION DEVICE: KNOB STEM-TYPE K

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

GRIP LENGTH: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN

•

SHANK STYLE: PULL THROUGH HOLLOW SHANK

•

SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
FASTENER LENGTH	0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
EXPANSION DEVICE	KNOB STEM-TYPE K
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
GRIP LENGTH	0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
SHANK STYLE	PULL THROUGH HOLLOW SHANK
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
MATERIAL	STEEL COMP 1012 OVERALL

SUBSTITUTES & CROSS-REFERENCES 8

5320PL0740503Reference document

Same NSN cross-reference

Reference document — Informative reference only

SS5051-03-06Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

3M117-306Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

202-17502-3-2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

HS4463-3-125Reference document

Same NSN cross-reference

Reference document — Secondary reference

1204-0306Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 110-103-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 110-103-3?

110-103-3 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace 110-103-3?

There are 8 known substitutes for 110-103-3: 5320PL0740503, SS5051-03-06, 3M117-306 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 110-103-3?

110-103-3 is cataloged in the U.S. Government catalog under NSN 5320-00-714-7493. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

110-103-3 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — 110-103-3