PartsTable
Technical Data Sheet
Download PDF

110-052-0001 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

110-052-0001: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, length: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN, material: COPPER ALLOY 172 OVERALL, hole_diameter: 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, overall_height: 0.336 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN, mounting_method: PROJECTING TAB. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-245-4790, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
110-052-0001
NSN: 5340-00-245-4790
FSC: 5340 — Hardware, Commercial
CAGE: 95542 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
width0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
length0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
materialCOPPER ALLOY 172 OVERALL
hole_diameter0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
overall_height0.336 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
mounting_methodPROJECTING TAB
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
loop/holding_dimension0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.177 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
material_document_and_classificationQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-245-4790
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 110-052-0001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: PROJECTING TAB
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.177 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.336 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
LENGTH0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODPROJECTING TAB
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
MATERIAL THICKNESS0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.177 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
6008-33CCReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 110-052-0001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110-052-0001?
110-052-0001 is a CLIP,SPRING TENSION.
What parts can replace 110-052-0001?
There is 1 known substitute for 110-052-0001: 6008-33CC. Substitute compatibility should be verified for your specific system.
What is the NSN for 110-052-0001?
110-052-0001 is cataloged in the U.S. Government catalog under NSN 5340-00-245-4790. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110-052-0001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.