PartsTable
Technical Data Sheet

110 47/64 — DEFLECTOR,AIR CLEANER,INTAKE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

110 47/64: DEFLECTOR,AIR CLEANER,INTAKE.

The DEFLECTOR,AIR CLEANER,INTAKE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG, flute_length: 5.875 INCHES NOMINAL IN, overall_length: 9.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-228-1334, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
110 47/64
NSN: 5133-00-228-1334
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 60NQ9 — GREENFIELD INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length5.875 INCHES NOMINAL IN
flute_quantity2
overall_length9.750 INCHES NOMINAL IN
special_featuresTAPER SHANK LG; FRACTIONAL SIZE 47/64
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter0.7344 INCHES IN
cutting_rotation_directionRIGHT-HAND
specification/standard_data05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5133-00-228-1334
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available DEFLECTOR,AIR CLEANER,INTAKE TITLE COMPONENT PN 110 47/64 MFR DEFLECTOR,AIR CLEANER,
KEY FEATURES
•
CUTTING END STYLE: GENERAL PURPOSE
•
TAPER SHANK SIZE DESIGNATOR: 2 MORSE
•
FLUTE LENGTH: 5.875 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 0.7344 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
SHANK STYLE: STANDARD TAPER W/TANG
TECHNICAL CHARACTERISTICS
CUTTING END STYLEGENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR2 MORSE
FLUTE LENGTH5.875 INCHES NOMINAL IN
OVERALL LENGTH9.750 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER0.7344 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLESTANDARD TAPER W/TANG
FLUTE QUANTITY2
SPECIAL FEATURESTAPER SHANK LG; FRACTIONAL SIZE 47/64
SUBSTITUTES & CROSS-REFERENCES 8
20047Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
53147Reference document
Same NSN cross-reference
Reference document — Secondary reference
25123Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
940 47/64Reference document
Same NSN cross-reference
Reference document — Secondary reference
B94.11MReference document
Same NSN cross-reference
Reference document — Design control — primary reference
200 47/64Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 110 47/64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 110 47/64?
110 47/64 is a DEFLECTOR,AIR CLEANER,INTAKE.
What parts can replace 110 47/64?
There are 8 known substitutes for 110 47/64: 20047, 53147, 25123 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 110 47/64?
110 47/64 is cataloged in the U.S. Government catalog under NSN 5133-00-228-1334. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 110 47/64