110 2-1/2 — CONNECTOR,PLUG,ELECTRICAL

✓ Government record, cited

Peach · MRO · MRO_GENERAL

PRODUCT OVERVIEW

110 2-1/2: CONNECTOR,PLUG,ELECTRICAL.

Toner modules from Peach ensure superb printouts with quality that remains consistent over the long run. The units are remanufactured, in a process that includes 100% replacement of all components subject to wear. Quality you can feel!

This part is cataloged in the U.S. Government catalog under NSN 5133-00-228-1415, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 110 2-1/2

NSN: 5133-00-228-1415
NIINs: 002281415, 009662362, 012290651, 012856174, 015489448
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 60NQ9 — GREENFIELD INDUSTRIES INC (USA)

SPECIFICATIONS

material	STEEL OVERALL
point_type	CONVENTIONAL
point_angle	118.0 DEGREES NOMINAL
shank_style	STANDARD TAPER W/TANG
flute_length	11.250 INCHES NOMINAL IN
flute_quantity	2
overall_length	18.750 INCHES NOMINAL IN
special_features	N.C. CLOSE ON DECREASE AT 7.5 GPM; ADDITIONAL COMPONENTS: SHUTTLE ASSY 1
unable_to_decode	UNABLE TO DECODE
cutting_end_style	GENERAL PURPOSE
end_item_identification	3805-01-537-7952;DITCHING MACHINE RT40
nominal_cutting_diameter	2.5000 INCHES IN
NSN	5133-00-228-1415

COMPONENT DIAGRAM

KEY FEATURES

•

CUTTING END STYLE: GENERAL PURPOSE

•

TAPER SHANK SIZE DESIGNATOR: 5 MORSE

•

FLUTE LENGTH: 11.250 INCHES NOMINAL IN

•

NOMINAL CUTTING DIAMETER: 2.5000 INCHES IN

•

CUTTING ROTATION DIRECTION: RIGHT-HAND

•

SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

•

SHANK STYLE: STANDARD TAPER W/TANG

TECHNICAL CHARACTERISTICS

CUTTING END STYLE	GENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR	5 MORSE
FLUTE LENGTH	11.250 INCHES NOMINAL IN
OVERALL LENGTH	18.750 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER	2.5000 INCHES IN
CUTTING ROTATION DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLE	STANDARD TAPER W/TANG
FLUTE QUANTITY	2
SPECIAL FEATURES	TAPER SHANK LG; FRACTIONAL SIZE 2-1/2

SUBSTITUTES & CROSS-REFERENCES 7

2410 2-1/2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

42-10266Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

20232Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

10124Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

29442Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

T-100Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 110 2-1/2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 110 2-1/2?

110 2-1/2 is a CONNECTOR,PLUG,ELECTRICAL manufactured by Peach. It is classified as a MRO (MRO_GENERAL).

What parts can replace 110 2-1/2?

There are 7 known substitutes for 110 2-1/2: 2410 2-1/2, 42-10266, 20232 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 110 2-1/2?

110 2-1/2 is cataloged in the U.S. Government catalog under NSN 5133-00-228-1415. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

110 2-1/2 — CONNECTOR,PLUG,ELECTRICAL

Request a Quote — 110 2-1/2