PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11-5265
11-5265 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

SUPPORT,STRUCTURAL COMPONENT,AIR. Key specifications include material: STEEL, design_form: STRAIGHT, wall_thickness: 0.0650 INCHES NOMINAL IN, reduced_end_length: 1.500 INCHES NOMINAL IN, enlarged_end_length: 2.485 INCHES MINIMUM AND 2.495 INCHES MAXIMUM IN, nominal_overall_length: 65.750 INCHES IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-7315, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11-5265
NSN: 3110-00-155-7315
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL
design_formSTRAIGHT
wall_thickness0.0650 INCHES NOMINAL IN
reduced_end_length1.500 INCHES NOMINAL IN
enlarged_end_length2.485 INCHES MINIMUM AND 2.495 INCHES MAXIMUM IN
nominal_overall_length65.750 INCHES IN
end_item_identificationTRUCK,SECURITY POLICE
nominal_outside_diameter2.500 INCHES IN
material_document_and_classificationQQ-T-830 FED SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-155-7315
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 11-5265 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 62.0 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING WITH TWO ROLLER RETAINMENT RINGS ON OUTER, NON-SEPARABLE
•
MATERIAL: STEEL ROLLER
•
BORE DIAMETER: 30.0 MILLIMETERS NOMINAL MM
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STANDARD TOLERANCE DESIGNATION: RBEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER62.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING WITH TWO ROLLER RETAINMENT RINGS ON OUTER, NON-SEPARABLE
MATERIALSTEEL ROLLER
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
BORE DIAMETER30.0 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
LOCATING FEATURENONLOCATING
OVERALL WIDTH16.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
7283Interchangeable
interchangeable cross-reference
interchangeable
653Interchangeable
interchangeable cross-reference
interchangeable
3247Interchangeable
interchangeable cross-reference
interchangeable
115260Interchangeable
interchangeable cross-reference
interchangeable
U1206TMInterchangeable
interchangeable cross-reference
interchangeable
SK201-19Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11-5265?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11-5265?
11-5265 is a SUPPORT,STRUCTURAL COMPONENT,AIR.
What parts can replace 11-5265?
There are 26 known substitutes for 11-5265: 7283, 653, 3247 and 23 more. Substitute compatibility should be verified for your specific system.
Is 11-5265 still available?
11-5265 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11-5265

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026