PartsTable
Technical Data Sheet
Download PDF

11-364-C — BUTTON,PLUG

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11-364-C: BUTTON,PLUG.

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, head_height: 0.078 INCHES NOMINAL IN, overall_height: 0.297 INCHES NOMINAL IN, prong_quantity: 12, style_designator: STANDARD, surface_treatment: NICKEL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-803-4495, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11-364-C
NSN: 5340-00-803-4495
FSC: 5340 — Hardware, Commercial
CAGE: 72653 — GC/WALDOM INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
head_height0.078 INCHES NOMINAL IN
overall_height0.297 INCHES NOMINAL IN
prong_quantity12
style_designatorSTANDARD
surface_treatmentNICKEL
head_outside_diameter0.922 INCHES NOMINAL IN
prong_outside_diameter0.781 INCHES NOMINAL IN
hole_accommodation_diameter0.750 INCHES NOMINAL IN
material_accommodated_thickness0.062 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
NSN5340-00-803-4495
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11-364-C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.078 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.062 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STANDARD
•
PRONG OUTSIDE DIAMETER: 0.781 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL
•
HEAD OUTSIDE DIAMETER: 0.922 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.297 INCHES NOMINAL IN
HEAD HEIGHT0.078 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER0.750 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.062 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
STYLE DESIGNATORSTANDARD
PRONG OUTSIDE DIAMETER0.781 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL
HEAD OUTSIDE DIAMETER0.922 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING
PRONG QUANTITY12
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1714AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11-364-C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11-364-C?
11-364-C is a BUTTON,PLUG.
What parts can replace 11-364-C?
There is 1 known substitute for 11-364-C: 1714A. Substitute compatibility should be verified for your specific system.
What is the NSN for 11-364-C?
11-364-C is cataloged in the U.S. Government catalog under NSN 5340-00-803-4495. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11-364-C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.