11-30635-1: BRACKET,ANGLE.
The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include angle: 90.0 DEGREES NOMINAL, material: STEEL COMP 6150, overall_width: 1.125 INCHES NOMINAL IN, heat_treatment: ANNEALED, first_leg_length: 3.187 INCHES NOMINAL IN, second_leg_length: 0.875 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5342-00-315-8906, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| angle | 90.0 DEGREES NOMINAL |
| material | STEEL COMP 6150 |
| overall_width | 1.125 INCHES NOMINAL IN |
| heat_treatment | ANNEALED |
| first_leg_length | 3.187 INCHES NOMINAL IN |
| second_leg_length | 0.875 INCHES NOMINAL IN |
| second_leg_thickness | 0.375 INCHES NOMINAL IN |
| specification/standard_data | 05047-ASME Y14.5M-1982 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD AND 05047-ASME B46.1 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD AND 96906-MIL-STD-130 GOVERNMENT STANDARD |
| criticality_code_justification | FEAT |
| part_name_assigned_by_controlling_agency | JAW,CLAMPING SEALING STRIP ANCHOR |
| NSN | 5342-00-315-8906 |
| SECOND LEG LENGTH | 0.875 INCHES NOMINAL IN |
| HEAT TREATMENT | ANNEALED |
| SUPPLEMENTARY FEATURES | MATERIAL TO BE I/A/W SPEC ASTM A322,GRADE STEEL 6150 ANNEALED OR SAE AMS 4350M; HEAT TREAT I/A/W AMS 2759/1 SO THAT FINISHED PART HAS A HARDNESS OF HRC 41 TO 45;EACH FINISHED PART SHALL BE 100% MAGNETIC PARTICLE INSPECTED I/A/W ASTM E1444/E1444M PERFORMED BY BOTH CIRCULAR AND LONGITUDINAL METHOD;THE WET PROCESS SHALL BE USED; PARTS MUST MEET REQUIREMENTS OF MIL-STD-2035 EXCEPT NO INDICATIONS GREATER THAN .062" ARE ACCEPTABLE |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| OVERALL WIDTH | 1.125 INCHES NOMINAL IN |
| ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG THICKNESS | 0.375 INCHES NOMINAL IN |
| SPECIFICATION/STANDARD DATA | 05047-ASME Y14.5M-1982 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD AND 05047-ASME B46.1 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD AND 96906-MIL-STD-130 GOVERNMENT STANDARD |
| FIRST LEG LENGTH | 3.187 INCHES NOMINAL IN |
| SPECIAL FEATURES | THE ITEM SPECIFIED BY DRAWING 11-30635 WILL BE USED AS A PART OF A SYSTEM SUPPORTING THE LAUNCH AND OR RECOVERY OF AIRCRAFT AND IS ESSENTIAL TO SYSTEM PERFORMANCE OR OPERATION OR THE PRESERVATION OF LIFE OR SAFETY OF OPERATING PERSONNEL; ITEM HAS BEEN DESIGNATED AS CRITICAL APPLICATION ITEM (CAI); ANY DEVIATION FROM DRAWING WITHOUT WRITTEN APPROVAL FROM THE NAVAL AIR SYSTEMS COMMAND (NAVIAR), SUPPORT EQUIPMENT AND AIRCRAFT LANCH AND RECOVERY EQUIPMENT (SE AND ALRE) DEPARTMENT, IS STRICTLY PROHIBITED |