PartsTable
Technical Data Sheet
Download PDF

11-3016 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

11-3016: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: RUBBER SYNTHETIC OVERALL, body_length: 1.750 INCHES NOMINAL IN, groove_width: 0.046 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN, body_diameter: 0.500 INCHES NOMINAL IN, grommet_style: ROUND, hole_diameter: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-174-9008, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11-3016
NSN: 5325-00-174-9008
NIINs: 001749008, 002924110, 005186748, 011046569, 016728165
FSC: 5325 — Fastening Devices
CAGE: 73734 — FEDERAL SCREW PRODUCTS, INC. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
body_length1.750 INCHES NOMINAL IN
groove_width0.046 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
body_diameter0.500 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
terminal_typeTAB, SOLDER LUG
inclosure_typeENCAPSULATED
overall_height0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
terminal_width0.328 INCHES NOMINAL IN
terminal_length0.375 INCHES NOMINAL IN
flange_thickness0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
NSN5325-00-174-9008
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11-3016 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROMMET STYLE: ROUND
•
FLANGE THICKNESS: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 BG515A14B24C32E036F19Z ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FEATURES PROVIDED: COOLANT RESISTANT AND OIL RESISTANT
•
LARGE FLANGE OUTSIDE DIAMETER: 1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
•
COLOR: BLACK OVERALL
•
GROOVE OUTSIDE DIAMETER: 1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
GROMMET STYLEROUND
FLANGE THICKNESS0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 BG515A14B24C32E036F19Z ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FEATURES PROVIDEDCOOLANT RESISTANT AND OIL RESISTANT
LARGE FLANGE OUTSIDE DIAMETER1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
COLORBLACK OVERALL
GROOVE OUTSIDE DIAMETER1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN
GROMMET CONSTRUCTION TYPESOLID
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
3010101Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN931-8S20Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
MS35489-15Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BM12053-22Reference document
Same NSN cross-reference
Reference document — Secondary reference
34Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5325PL1939983Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11-3016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11-3016?
11-3016 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11-3016?
There are 8 known substitutes for 11-3016: 3010101, AN931-8S20, MS35489-15 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11-3016?
11-3016 is cataloged in the U.S. Government catalog under NSN 5325-00-174-9008. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11-3016

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.