PartsTable
Technical Data Sheet
Download PDF

11-3-029 — 11-3-029

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

11-3-029: 11-3-029.

The 11-3-029 is a the manufacturer industrial component. Key specifications include overall_height: 0.500 INCHES NOMINAL IN, overall_length: 9.938 INCHES NOMINAL IN, special_features: CAPACITOR 4,RESISTOR 76,PRINTEDWIRING BOARD 1, criticality_code_justification: ZZZY. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-097-6369, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11-3-029
NSN: 3120-00-097-6369
NIINs: 000976369, 005005909, 005159685, 006493420, 011480015
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 82386 — JAIDINGER MANUFACTURING CO INC DBA JAIDINGER MANUFACTURING CO INC (USA)
SPECIFICATIONS
overall_height0.500 INCHES NOMINAL IN
overall_length9.938 INCHES NOMINAL IN
special_featuresCAPACITOR 4,RESISTOR 76,PRINTEDWIRING BOARD 1
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
NSN3120-00-097-6369
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 11-3-029 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY OUTSIDE DIAMETER: 2.0030 INCHES MINIMUM AND 2.0040 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-B-5697,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
BODY INSIDE DIAMETER: 1.5020 INCHES MINIMUM AND 1.5030 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER2.0030 INCHES MINIMUM AND 2.0040 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-5697,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.6820 INCHES MINIMUM AND 0.6920 INCHES MAXIMUM IN
BODY INSIDE DIAMETER1.5020 INCHES MINIMUM AND 1.5030 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
MATERIALOIL LUBRICATING LUBRICATION
SUBSTITUTES & CROSS-REFERENCES 1
A600-1195Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11-3-029?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11-3-029?
11-3-029 is a 11-3-029. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11-3-029?
There is 1 known substitute for 11-3-029: A600-1195. Substitute compatibility should be verified for your specific system.
What is the NSN for 11-3-029?
11-3-029 is cataloged in the U.S. Government catalog under NSN 3120-00-097-6369. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11-3-029

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.