PartsTable
Technical Data Sheet
PartsTable / MRO / 11-1625
11-1625 ✓ Verified by PartsTable
Beko · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The SHIELDING GASKET,ELECTRONIC is a Beko industrial component. Key specifications include material: STEEL BODY, head_style: FLAT CHAMFER, head_height: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN, overall_width: 0.625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-142-2010, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11-1625
NSN: 4730-00-142-2010
FSC: 4730
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
materialSTEEL BODY
head_styleFLAT CHAMFER
head_height0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN
overall_width0.625 INCHES NOMINAL IN
thread_length0.938 INCHES NOMINAL IN
shoulder_shapeROUND FIRST SHOULDER
fastener_length1.750 INCHES NOMINAL IN
inside_diameter2.219 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
shoulder_length0.375 INCHES NOMINAL FIRST SHOULDER IN
special_featuresSIX WRENCHING FLATS 0.309 IN. ACROSS THE FLATS 0.250 IN. LONG BEGINNING AFTER SHOULDER IN
NSN4730-00-142-2010
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 11-1625 · Beko ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CHROMATE ZINC NUT
•
STYLE DESIGNATOR: BAND
•
MATERIAL: STEEL COMP 1010 OVERALL
•
FASTENING DEVICE TYPE: PLAIN SLOTTED HEAD SCREW
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCHROMATE ZINC NUT
STYLE DESIGNATORBAND
MATERIALSTEEL COMP 1010 OVERALL
SURFACE TREATMENTZINC BAND
SURFACE TREATMENTCHROMATE ZINC SCREW
FASTENING DEVICE TYPEPLAIN SLOTTED HEAD SCREW
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.625 INCHES NOMINAL IN
INSIDE DIAMETER2.219 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
PM21399Interchangeable
interchangeable cross-reference
interchangeable
21399Interchangeable
interchangeable cross-reference
interchangeable
VP-55Interchangeable
interchangeable cross-reference
interchangeable
399Interchangeable
interchangeable cross-reference
interchangeable
2567526-2Interchangeable
interchangeable cross-reference
interchangeable
6912JInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11-1625?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11-1625?
11-1625 is a SHIELDING GASKET,ELECTRONIC manufactured by Beko. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11-1625?
There are 22 known substitutes for 11-1625: PM21399, 21399, VP-55 and 19 more. Substitute compatibility should be verified for your specific system.
Is 11-1625 still available?
11-1625 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11-1625

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026