PartsTable
Technical Data Sheet
PartsTable / MRO / 11-162
11-162 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include phase: SINGLE INPUT, material: STEEL OVERALL, body_width: 2.500 INCHES MAXIMUM IN, cone_width: 0.6844 INCHES NOMINAL IN, body_height: 2.750 INCHES MAXIMUM IN, body_length: 2.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-101-0798, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11-162
NSN: 3110-00-101-0798
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
phaseSINGLE INPUT
materialSTEEL OVERALL
body_width2.500 INCHES MAXIMUM IN
cone_width0.6844 INCHES NOMINAL IN
body_height2.750 INCHES MAXIMUM IN
body_length2.000 INCHES NOMINAL IN
temp_rating-65.0 OPERATING CELSIUS AND 125.0 OPERATING CELSIUS
current_typeAC INPUT
thread_class2A A
body_diameter0.670 INCHES NOMINAL IN
bore_diameter1.6250 INCHES NOMINAL IN
overall_width4.500 INCHES NOMINAL IN
NSN3110-00-101-0798
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 11-162 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 0.6844 INCHES NOMINAL IN
•
BORE DIAMETER: 1.6250 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH0.6844 INCHES NOMINAL IN
BORE DIAMETER1.6250 INCHES NOMINAL IN
CONE CORNER RADIUS0.0625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
NFT420Interchangeable
interchangeable cross-reference
interchangeable
11162Interchangeable
interchangeable cross-reference
interchangeable
SK8811Interchangeable
interchangeable cross-reference
interchangeable
C45-5051-07-00Interchangeable
interchangeable cross-reference
interchangeable
10CM-9905-DInterchangeable
interchangeable cross-reference
interchangeable
2680849Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11-162?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11-162?
11-162 is a CAPACITOR,FIXED,PAPER DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11-162?
There are 15 known substitutes for 11-162: NFT420, 11162, SK8811 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11-162?
11-162 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-101-0798. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11-162

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026