PartsTable
Technical Data Sheet
Download PDF

11-00055 — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited
Conceptronic · MRO · MRO_GENERAL
PRODUCT OVERVIEW

11-00055: CAPACITOR,FIXED,CERAMIC DIELECTR.

This dual USB car charger is the ideal solution for charging your iPad or tablet and most of your other USB devices like (smart) phones and MP3-players through the cigarette lighter of your car, truck or boat! The dual USB car charger works on 12 - 24 volt and converts it to 5 volt. You can easily charge your USB devices while travelling by car, truck or boat, without the need of a PC, notebook or wall socket.

Thanks to the high output power and 2 USB ports, you can charge 2 USB devices at the same time! This part is cataloged in the U.S. Government catalog under NSN 3110-00-555-5207, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11-00055
NSN: 3110-00-555-5207
NIINs: 005555207, 014066307
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.400 INCHES MAXIMUM IN
body_height0.150 INCHES NOMINAL IN
body_length0.400 INCHES MAXIMUM IN
terminal_length0.200 INCHES NOMINAL IN
terminal_diameter0.020 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
end_item_identification6625-01-304-1742 TEST SET,COMPUTER LOGIC UNIT
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
NSN3110-00-555-5207
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 11-00055 · Conceptronic ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
SUBSTITUTES & CROSS-REFERENCES 10
1307Reference document
Same NSN cross-reference
Reference document — Secondary reference
159330-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
6307Reference document
Same NSN cross-reference
Reference document — Secondary reference
1450Reference document
Same NSN cross-reference
Reference document — Secondary reference
6307 JQReference document
Same NSN cross-reference
Reference document — Secondary reference
19326-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11-00055?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11-00055?
11-00055 is a CAPACITOR,FIXED,CERAMIC DIELECTR manufactured by Conceptronic. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11-00055?
There are 10 known substitutes for 11-00055: 1307, 159330-3, 6307 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11-00055?
11-00055 is cataloged in the U.S. Government catalog under NSN 3110-00-555-5207. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11-00055