PartsTable
Technical Data Sheet
Download PDF

10W3522 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10W3522: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1015, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 2.000 INCHES NOMINAL IN, first_leg_length: 1.500 INCHES NOMINAL IN, second_leg_style: SQUARE AND TAPERED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-350-2358, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10W3522
NSN: 5340-00-350-2358
FSC: 5340 — Hardware, Commercial
CAGE: 62265 — VOLVO TRUCKS NORTH AMERICA, INC. DBA (FOREIGN PARENT IS VOLVO LASTVAGNAR AB, GOTEBORG, SWEDEN.) (USA)
SPECIFICATIONS
materialSTEEL COMP 1015
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width2.000 INCHES NOMINAL IN
first_leg_length1.500 INCHES NOMINAL IN
second_leg_styleSQUARE AND TAPERED
second_leg_width2.000 INCHES NOMINAL IN
special_featuresSECOND LEG HOLE TAPPED 3/8-24 THDS
style_designatorANGLE
second_leg_length2.875 INCHES NOMINAL IN
first_leg_thickness0.250 INCHES NOMINAL IN
second_leg_end_width1.000 INCHES NOMINAL IN
NSN5340-00-350-2358
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10W3522 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.375 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.281 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.250 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.375 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.375 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.500 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.281 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.250 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.375 INCHES NOMINAL IN
SECOND LEG WIDTH2.000 INCHES NOMINAL IN
SECOND LEG LENGTH2.875 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
SUBSTITUTES & CROSS-REFERENCES 3
344332Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
N2298Reference document
Same NSN cross-reference
Reference document — Secondary reference
6167797Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10W3522?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10W3522?
10W3522 is a BRACKET,ANGLE.
What parts can replace 10W3522?
There are 3 known substitutes for 10W3522: 344332, N2298, 6167797. Substitute compatibility should be verified for your specific system.
What is the NSN for 10W3522?
10W3522 is cataloged in the U.S. Government catalog under NSN 5340-00-350-2358. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10W3522