PartsTable
Technical Data Sheet
Download PDF

10V60-141-328 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10V60-141-328: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 1.840 INCHES MINIMUM AND 1.860 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-291-7339, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10V60-141-328
NSN: 5331-00-291-7339
FSC: 5331 — O-ring
CAGE: 73277 — HOUGHTON INTERNATIONAL INC. (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter1.840 INCHES MINIMUM AND 1.860 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5331-00-291-7339
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10V60-141-328 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.840 INCHES MINIMUM AND 1.860 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.840 INCHES MINIMUM AND 1.860 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONOVER THE HORIZON BACK SCANNER (OTH-B) PROGRAM (AN/FPS-118);SUPPORT EQUIPMENT,B-1 AIRCRAFT;SONAR RUBBER DOMES (SRDS);NIMITZ CLASS CVN;VIRGINIA CLASS CGN (41);AIRCRAFT,STRATOFORTRESS B-52;TICONDEROGA CG (47);TRUCK,FL (M10A);SPRUANCE CLASS DD (963);RADAR SET LT AIR TRAFFIC CONTROL (17M JUL83)(AN/TPS-63)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
60-P-31-328Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-328 N602-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
SR-822A-60-328Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
N0602 2-238Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS29513Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
RT253-65-328Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 10V60-141-328?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10V60-141-328?
10V60-141-328 is a O-RING.
What parts can replace 10V60-141-328?
There are 8 known substitutes for 10V60-141-328: 60-P-31-328, 2-328 N602-70, SR-822A-60-328 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10V60-141-328?
10V60-141-328 is cataloged in the U.S. Government catalog under NSN 5331-00-291-7339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10V60-141-328