PartsTable
Technical Data Sheet
10V60-141-232 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, outside_diameter: 3.012 INCHES NOMINAL IN, center_hole_diameter: 2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN, elongation_percentage: 200 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-251-9364, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10V60-141-232
NSN: 5331-00-251-9364
FSC: 5331 — O-RING
CAGE: 73277 — HOUGHTON INTERNATIONAL INC. (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
outside_diameter3.012 INCHES NOMINAL IN
center_hole_diameter2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN
elongation_percentage200 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-251-9364
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10V60-141-232 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
OUTSIDE DIAMETER: 3.012 INCHES NOMINAL IN
ELONGATION PERCENTAGE: 200 MAXIMUM
CENTER HOLE DIAMETER: 2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER3.012 INCHES NOMINAL IN
ELONGATION PERCENTAGE200 MAXIMUM
CENTER HOLE DIAMETER2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
8745-7815RInterchangeable
interchangeable cross-reference
interchangeable
2015319-0701Interchangeable
interchangeable cross-reference
interchangeable
8745Interchangeable
interchangeable cross-reference
interchangeable
PPP-B-636 TYCFVASWGR275STRSCCLDOInterchangeable
interchangeable cross-reference
interchangeable
PPP-B-636Interchangeable
interchangeable cross-reference
interchangeable
ASTM-D5118 TYCFVASWGR275STRSCCLDInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10V60-141-232?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10V60-141-232?
10V60-141-232 is a O-RING.
What parts can replace 10V60-141-232?
There are 28 known substitutes for 10V60-141-232: 8745-7815R, 2015319-0701, 8745 and 25 more. Substitute compatibility should be verified for your specific system.
Is 10V60-141-232 still available?
10V60-141-232 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10V60-141-232