PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10S04-115W
10S04-115W ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 INSIDE DIAMETER SURFACE OF BODY, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM IN, overall_length: 1.9530 INCHES NOMINAL IN, thread_diameter: 0.3120 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-407-4375, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10S04-115W
NSN: 3120-00-407-4375
FSC: 3120
CAGE: 16746 — RBC SPECLINE INC DBA SPECLINE INC (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 INSIDE DIAMETER SURFACE OF BODY
shank_styleEXTERNALLY THREADED
thread_class3A A
bore_diameter0.2495 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM IN
overall_length1.9530 INCHES NOMINAL IN
thread_diameter0.3120 INCHES NOMINAL IN
special_featuresKEYWAY IN SHANK
style_designatorBALL TYPE
thread_directionRIGHT-HAND
features_providedFLUSH LUBRICATION FITTING
inner_member_width0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
outer_member_width0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM IN
NSN3120-00-407-4375
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 10S04-115W · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.2495 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM IN
•
OUTER MEMBER OUTSIDE DIAMETER: 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
INNER MEMBER WIDTH: 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
THREAD SERIES DESIGNATOR: UNF
•
MATERIAL: BRONZE AND ALUMINUM OUTER LAYER
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.2495 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM IN
OVERALL LENGTH1.9530 INCHES NOMINAL IN
OUTER MEMBER OUTSIDE DIAMETER0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
INNER MEMBER WIDTH0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
TEST DATA DOCUMENT81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD SERIES DESIGNATORUNF
MATERIALBRONZE AND ALUMINUM OUTER LAYER
MATERIALSTEEL COMP E52100 INNER MEMBER
THREAD CLASS3A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
7008795Interchangeable
interchangeable cross-reference
interchangeable
51281Interchangeable
interchangeable cross-reference
interchangeable
B21337Interchangeable
interchangeable cross-reference
interchangeable
979-1B445Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-2692Interchangeable
interchangeable cross-reference
interchangeable
BRE4-2015Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10S04-115W?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10S04-115W?
10S04-115W is a BEARING,PLAIN,ROD END.
What parts can replace 10S04-115W?
There are 8 known substitutes for 10S04-115W: 7008795, 51281, B21337 and 5 more. Substitute compatibility should be verified for your specific system.
Is 10S04-115W still available?
10S04-115W is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10S04-115W

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026