PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10NBC1620YZP
10NBC1620YZP ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL, bore_diameter: 0.6250 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 1.0000 INCHES NOMINAL IN, outer_ring_width: 0.9062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10NBC1620YZP
NSN: 3110-00-227-2806
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
bore_diameter0.6250 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width1.0000 INCHES NOMINAL IN
outer_ring_width0.9062 INCHES NOMINAL IN
special_featuresOIL HOLE AND GROOVE IN OUTER AND INNER RINGS
style_designatorCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter1.2500 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-00-227-2806
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10NBC1620YZP · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER RING WIDTH: 1.0000 INCHES NOMINAL IN
•
OUTER RING WIDTH: 0.9062 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGID
•
LUBRICATION MATERIAL: GREASE
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
INNER RING WIDTH1.0000 INCHES NOMINAL IN
OUTER RING WIDTH0.9062 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
ALIGNMENT TYPERIGID
LUBRICATION MATERIALGREASE
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER AND INNER RINGS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
STYLE DESIGNATORCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
450-1205-000Interchangeable
interchangeable cross-reference
interchangeable
ST30671Interchangeable
interchangeable cross-reference
interchangeable
50510Interchangeable
interchangeable cross-reference
interchangeable
1117F1Interchangeable
interchangeable cross-reference
interchangeable
1117F2Interchangeable
interchangeable cross-reference
interchangeable
MS17161-123Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10NBC1620YZP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10NBC1620YZP?
10NBC1620YZP is a BEARING,ROLLER,NEEDLE.
What parts can replace 10NBC1620YZP?
There are 26 known substitutes for 10NBC1620YZP: 450-1205-000, ST30671, 50510 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10NBC1620YZP?
10NBC1620YZP is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10NBC1620YZP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026