PartsTable
Technical Data Sheet
PartsTable / MRO / 10F4
10F4 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_length: 1.500 INCHES NOMINAL IN, body_diameter: 0.438 INCHES NOMINAL IN, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCAPSULATED, terminal_width: 0.250 INCHES NOMINAL IN, terminal_length: 0.562 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-044-4577, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10F4
NSN: 4730-00-044-4577
FSC: 4730
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
body_length1.500 INCHES NOMINAL IN
body_diameter0.438 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG
inclosure_typeENCAPSULATED
terminal_width0.250 INCHES NOMINAL IN
terminal_length0.562 INCHES NOMINAL IN
style_designatorRADIAL TERMINAL EACH END
electrical_resistance4.000 OHMS
reliability_indicatorNOT ESTABLISHED
nondefinitive_spec/std_dataIW FORM
resistance_tolerance_in_percent-10.000 TO 10.000
ambient_temp_at_full_rated_power50.0 CELSIUS DEGC
NSN4730-00-044-4577
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 10F4 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
13218E0122-13Interchangeable
interchangeable cross-reference
interchangeable
5406-P-4Interchangeable
interchangeable cross-reference
interchangeable
5M6213Interchangeable
interchangeable cross-reference
interchangeable
103878Interchangeable
interchangeable cross-reference
interchangeable
10F4Interchangeable
interchangeable cross-reference
interchangeable
PU181PGC1ANDPU181APGC1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10F4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10F4?
10F4 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10F4?
There are 24 known substitutes for 10F4: 13218E0122-13, 5406-P-4, 5M6213 and 21 more. Substitute compatibility should be verified for your specific system.
Is 10F4 still available?
10F4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10F4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026