PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10E-240-2-16
10E-240-2-16 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.7710 INCHES NOMINAL IN, bore_diameter: 1.1900 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0310 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1969, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10E-240-2-16
NSN: 3110-00-198-1969
FSC: 3110
CAGE: 35377 — MAKINO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.7710 INCHES NOMINAL IN
bore_diameter1.1900 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.0310 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-198-1969
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10E-240-2-16 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
CONE WIDTH: 0.7710 INCHES NOMINAL IN
•
BORE DIAMETER: 1.1900 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.0310 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
CONE WIDTH0.7710 INCHES NOMINAL IN
BORE DIAMETER1.1900 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
7008465Interchangeable
interchangeable cross-reference
interchangeable
C81-2-22Interchangeable
interchangeable cross-reference
interchangeable
23089Interchangeable
interchangeable cross-reference
interchangeable
14116Interchangeable
interchangeable cross-reference
interchangeable
5322Interchangeable
interchangeable cross-reference
interchangeable
6347FInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10E-240-2-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10E-240-2-16?
10E-240-2-16 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 10E-240-2-16?
There are 17 known substitutes for 10E-240-2-16: 7008465, C81-2-22, 23089 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10E-240-2-16?
10E-240-2-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1969. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10E-240-2-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026