PartsTable
Technical Data Sheet
Download PDF

10D08 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10D08: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: LEFT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-011-0816, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10D08
NSN: 5310-00-011-0816
FSC: 5310 — Nuts and Washers
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionLEFT-HAND
width_across_flats0.737 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nominal_thread_size0.500 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch20
nondefinitive_spec/std_dataA TYPE
NSN5310-00-011-0816
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10D08 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.737 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: LEFT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
NUT HEIGHT: 0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.737 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
THREAD SERIESUNF
THREAD DIRECTIONLEFT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NONDEFINITIVE SPEC/STD DATAA TYPE
NUT HEIGHT0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH20
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
110816Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FFB571TYPEAReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10D08?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10D08?
10D08 is a NUT,PLAIN,HEXAGON.
What parts can replace 10D08?
There are 2 known substitutes for 10D08: 110816, FFB571TYPEA. Substitute compatibility should be verified for your specific system.
What is the NSN for 10D08?
10D08 is cataloged in the U.S. Government catalog under NSN 5310-00-011-0816. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10D08

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.