PartsTable
Technical Data Sheet
Download PDF

10CT — ELBOW,PIPE TO TUBE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

10CT: ELBOW,PIPE TO TUBE.

The ELBOW,PIPE TO TUBE is a the manufacturer industrial component. Key specifications include pattern_type: AMERICAN, face_cut_type: STANDARD, special_features: 8 TEETH PER INCH, style_designator: FLAT CURVED TOOTH TYPE, RIGID. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-231-3068, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10CT
NSN: 4730-00-231-3068
NIINs: 002313068, 013351593
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 45681 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV CORPORATE HEADQUARTERS (USA)
SPECIFICATIONS
pattern_typeAMERICAN
face_cut_typeSTANDARD
special_features8 TEETH PER INCH
style_designatorFLAT CURVED TOOTH TYPE, RIGID
NSN4730-00-231-3068
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 10CT · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES
•
NOMINAL PIPE SIZE ACCOMMODATED: 0.500 INCHES SECOND END IN
•
CONNECTION STYLE: FLARED (TUBE) FIRST END
•
CONNECTION TYPE: THREADED EXTERNAL PIPE SECOND END
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.625 INCHES FIRST END IN
•
LEG LENGTH: 1.438 INCHES NOMINAL SECOND END IN
TECHNICAL CHARACTERISTICS
FLOW ANGLE90.0 DEGREES
NOMINAL PIPE SIZE ACCOMMODATED0.500 INCHES SECOND END IN
CONNECTION STYLEFLARED (TUBE) FIRST END
CONNECTION STYLEPLAIN (PIPE) SECOND END
CONNECTION TYPETHREADED EXTERNAL PIPE SECOND END
CONNECTION TYPETHREADED EXTERNAL TUBE FIRST END
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.625 INCHES FIRST END IN
LEG LENGTH1.438 INCHES NOMINAL SECOND END IN
LEG LENGTH1.219 INCHES NOMINAL FIRST END IN
NOMINAL THREAD SIZE0.500 INCHES SECOND END IN
SUBSTITUTES & CROSS-REFERENCES 3
9400X10Reference document
Same NSN cross-reference
Reference document — Secondary reference
10CT-BReference document
Same NSN cross-reference
Reference document — Secondary reference
811CT10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10CT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10CT?
10CT is a ELBOW,PIPE TO TUBE.
What parts can replace 10CT?
There are 3 known substitutes for 10CT: 9400X10, 10CT-B, 811CT10. Substitute compatibility should be verified for your specific system.
What is the NSN for 10CT?
10CT is cataloged in the U.S. Government catalog under NSN 4730-00-231-3068. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10CT