PartsTable
Technical Data Sheet
PartsTable / O-RING / 10A2235A-1 REV. 3 KEY 4
10A2235A-1 REV. 3 KEY 4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 10A2235A-1 REV. 3 KEY 4 is a the manufacturer industrial component. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-546-4700, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10A2235A-1 REV. 3 KEY 4
NSN: 5331-01-546-4700
FSC: 5331 — O-RING
CAGE: 22375 — FISCHER AND PORTER CO (USA)
SPECIFICATIONS
Part Number10A2235A-1 REV. 3 KEY 4
NSN5331-01-546-4700
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10A2235A-1 REV. 3 KEY 4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.168 INCHES MINIMUM AND 1.180 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CRITICALITY CODE JUSTIFICATIONZZZY
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.168 INCHES MINIMUM AND 1.180 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
871123Interchangeable
interchangeable cross-reference
interchangeable
5330-217-34Interchangeable
interchangeable cross-reference
interchangeable
22123-2Interchangeable
interchangeable cross-reference
interchangeable
101A923U01Interchangeable
interchangeable cross-reference
interchangeable
101A923Interchangeable
interchangeable cross-reference
interchangeable
101A923U01CPInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10A2235A-1 REV. 3 KEY 4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10A2235A-1 REV. 3 KEY 4?
10A2235A-1 REV. 3 KEY 4 is a 10A2235A-1 REV. 3 KEY 4.
What parts can replace 10A2235A-1 REV. 3 KEY 4?
There are 9 known substitutes for 10A2235A-1 REV. 3 KEY 4: 871123, 5330-217-34, 22123-2 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10A2235A-1 REV. 3 KEY 4?
10A2235A-1 REV. 3 KEY 4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-546-4700. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10A2235A-1 REV. 3 KEY 4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026